Product Description Functions and Features Table 2 Functions and features of the ES1D2C02FEE0 Function and Feature Description Basic functions Provides two 100GE optical ports for data transmission and switching. Distributed forwarding Performs concurrent data forwarding using a distributed data plane. Buffer 5 MB Hot swap Supported Indicators and Ports Figure 2 Indicators on the ES1D2C02FEE0 panel Table 3 Indicators on the ES1D2C02FEE0 panel Number Indicator Color Description 1 When a 100GE port is not split, this indicator shows the status of the 100GE port. Green Steady on: A link has been established on the 100GE port. Blinking: The 100GE port is transmitting and receiving data. 2 When a 100GE port is split into two 40GE ports, indicators 0 and 1 show the status of the 40GE ports. Green When indicator 0 turns on, it shows the status of the first 40GE port derived from the 100GE port. When indicator 1 turns on, it shows the status of the second 40GE port. Steady on: A link has been established on the 40GE port. Blinking: The 40GE port is transmitting and receiving data. 3 When a 100GE port is split into ten 10GE ports, indicators 0 to 9 show the status of the 10GE ports. Green When indicator 0 turns on, it shows the status of the first 10GE port derived from the 100GE port. Similarly, the other indicators turn on in sequence to show status of the rest of 10GE ports. Steady on: A link has been established on the 10GE port. Blinking: The 10GE port is transmitting and receiving data. 4 RUN/ALM: running status indicator Green Steady on: The card has been powered on, but the software is not running. Slow blinking: The card software is running properly. Fast blinking: The card software is starting. Red Steady on: The card has failed, and the fault requires manual intervention. Yellow Steady on: The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) Figure 3 Ports on the ES1D2C02FEE0 panel 1 Two 100GE optical ports 100GE optical port Table 4 lists the attributes of a 100GE optical port. Table 4 Attributes of a 100GE optical port Attribute Description Connector type CFP Optical port attributes Depend on the 40GE CFP Optical Modules and 100GE CFP Optical Modules used Applicable cable CFP optical module and LC optical fiber CFP optical module and MPO optical fiber (MPO-MPO, MPO-2*MPO, or MPO-10*DLC optical fiber) Specifications Table 5 Specifications of the ES1D2C02FEE0 Item Description Physical specifications Dimensions (W x D x H): 394.7 mm x 426.8 mm x 35.1 mm (15.5 in. x 16.8 in. x 1.4 in.) Weight: 4.20 kg (9.26 lb) Maximum power consumption: 339 W Environment parameters Operating temperature: When the card is used in an S7703, S7706 or S7712 chassis: 0C to 40C (32F to 104F), when the ambient temperature exceeds 40C (104F), the bandwidth on port 1 will decrease to 60 Gbit/s. When the ambient temperature falls within the range of 0C to 40C (32F to 104F), the bandwidth on port 1 will restore to 100 Gbit/s. Operating relative humidity: 5% RH to 95% RH (noncondensing) Storage temperature: -40C to +70C (-40F to 158F) Storage relative humidity: 5% RH to 95% RH (noncondensing) Ordering Information Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain latest ordering information, contact Huawei switch distributors or Huawei local office. Table 6 Ordering information Part Number Card Description Card Model 03030XJN 2-port 100GBASE-X interface card (EE, CFP) ES1D2C02FEE0
