Huawei Switch S5731-H48T4XC 48x10/100/1000BASE-T Ports, 4x10GE SFP+ Ports, 1*Expansion slot S5731-H48T4XC Overview Huawei S5731-H48T4XC (48*10/100/1000BASE-T ports, 4*10GE SFP+ ports, 1*expansion slot, without power module S5731-H48T4XC Specification Item Description Memory (RAM) 4 GB Flash 1 GB in total. To view the available flash memory size, run the display version command. Mean time between failures (MTBF) 55.31 years Mean time to repair (MTTR) 2 hours Availability gt, 0.99999 Service port surge protection Common mode: plusmn,6 kV Power supply surge protection Using AC power modules: plusmn,6 kV in differential mode, plusmn,6 kV in common mode Using DC power modules: plusmn,2 kV in differential mode, plusmn,4 kV in common mode Dimensions (H x W x D) Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 448.0 mm (1.72 in. x 17.4 in. x 17.7 in.) Weight (with packaging) 8.55 kg (18.85 lb) Stack ports 10GE SFP+ ports on the front panel, or 10GE SFP+ ports or 40GE QSFP+ ports on the rear card RTC Supported RPS Not supported PoE Not supported Rated voltage range AC input: 100 V AC to 240 V AC, 50/60 Hz High-Voltage DC input: 240 V DC DC input: -48 V DC to -60 V DC Maximum voltage range AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz High-Voltage DC input: 190 V DC to 290 V DC DC input: -38.4 V DC to -72 V DC Maximum power consumption (100% throughput, full speed of fans) 124 W (without card) Typical power consumption (30% of traffic load, tested according to ATIS standard) 101 (without card) Storage temperature -40C to +70C (-40F to +158F) Noise under normal temperature (27C, sound power) lt, 57.5 dB(A) Relative humidity 5% to 95%, noncondensing Operating altitude 0-5000 m (0-16404 ft.) Certification EMC certification Safety certification Manufacturing certification Part number 02352QPT S5731-H48T4XC appearance 1 Forty-eight 10/100/1000BASE-T ports 2 Four 10GE SFP+ ports Applicable modules and cables: GE optical module GE-CWDM optical module GE-DWDM optical module GE copper module (100M/1000M auto-sensing) 10GE SFP+ optical module (OSXD22N00 not supported) 10GE-CWDM optical module 10GE-DWDM optical module 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables 3 m and 10 m AOC cables 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking) 3 One console port 4 One ETH management port 5 One USB port 6 One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. 7 Ground screw NOTE: It is used with a ground cable. 8 Rear card slot NOTE: Applicable card: ES5D21X08T00 ES5D21Q02Q00 9 Fan module slot 1 NOTE: Applicable fan module: FAN-023A-B Fan Module 10 Fan module slot 2 NOTE: Applicable fan module: FAN-023A-B Fan Module 11 Power module slot 1 NOTE: Applicable power module: 600 W AC Power Module (PAC600S12-CB) 1000 W DC Power Module (PDC1000S12-DB) 150 W AC Power Module (PAC150S12-R) 12 Power module slot 2 NOTE: Applicable power module: 600 W AC Power Module (PAC600S12-CB) 1000 W DC Power Module (PDC1000S12-DB) 150 W AC Power Module (PAC150S12-R)
