Huawei Switch S5710-28X-LI-AC 24x10/100/1000Base-T Ethernet ports, 4x10 Gigabit SFP+ S5710-28X-LI-AC Overview Huawei Switch S5710-28X-LI-AC 24x10/100/1000Base-T Ethernet ports, 4x10 Gigabit SFP+ Technical specifications Item Description Memory (RAM) 512 MB Flash 512 MB in total. To view the available flash memory size, run the display version command. Mean time between failures (MTBF) 100.31 years Mean time to repair (MTTR) 2 hours Availability gt, 0.99999 Service port surge protection Common mode: plusmn,6 kV Power supply surge protection plusmn,6 kV in differential mode, plusmn,6 kV in common mode Dimensions (H x W x D) 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.) Weight (with packaging) 4.8 kg (10.58 lb) Stack ports Four uplink 10GE SFP+ ports RTC Supported RPS Supported PoE Not supported Rated voltage range 100 V AC to 240 V AC, 50/60 Hz Maximum voltage range 90 V AC to 264 V AC, 47 Hz to 63 Hz Maximum power consumption (100% throughput, full speed of fans) 32 W Typical power consumption (30% of traffic load) Tested according to ATIS standard EEE enabled No PoE power consumption 22 W Operating temperature 0C to 45C (32F to 113F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1C (1.8F) every time the altitude increases by 220 m (722 ft.). Storage temperature -40C to +70C (-40F to +158F) Noise under normal temperature (27C, sound power) lt, 50.2 dB(A) Relative humidity 5% to 95%, noncondensing Operating altitude 0-5000 m (0-16404 ft.) Certification EMC certification Safety certification Manufacturing certification Part number 02350GEM S5710-28X-LI-AC appearance 1 Twenty-four 10/100/1000BASE-T ports 2 Four 10GE SFP+ ports Applicable modules and cables: GE optical module GE-CWDM optical module GE-DWDM optical module GE copper module (only 1000 Mbit/s supported) 10GE SFP+ optical module (a maximum transmission distance of 10 km, OSXD22N00 not supported) 1 m, 3 m, and 10 m SFP+ high-speed copper cables 5 m SFP+ high-speed copper cable (applicable in V200R009C00 and later versions) 3 m and 10 m AOC cables 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, supported in V200R011C10 and later versions) GPON optical module (applicable in V200R012C00 version) NOTE: If a port uses a GPON optical module, other 10GE SFP+ optical ports cannot be used. 3 One ETH management port 4 One console port 5 One USB port 6 Ground screw NOTE: It is used with a ground cable. 7 RPS socket NOTE: It is used with an RPS cable, which is not hot swappable. 8 Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch. 9 AC socket NOTE: It is used with an AC power cable. - - Our Client
