HW S-SFP-FE-LH40-SM1310 compatible SFP transceiver supports up to 40km link lengths over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. Each SFP transceiver module is individually tested to be used on a series of HW switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, the hot swappable 100BASE SFP transceiver is ideal for Internet Service Provider (ISP) Fast Ethernet communication links, Enterprise LAN SAN Networks, Data Center LAN SAN Networks and other optical links. Product Code S-SFP-FE-LH40-SM1310 Transceiver type eSFP Transmission speed 100 Mbit/s Center wavelength (nm) 1310 Standard compliance 100base-LX Connector type LC Applicable cable and maximum transmission distance Single-mode fiber: 40 km Transmit power (dBm) -5.0 to 0 Maximum receiver sensitivity (dBm) -37.0 Overload power (dBm) -10.0 Extinction ratio (dB) 10.5 Operating temperature 0C to 70C (32F to 158F) Net Dimension(D x W x H mm) 110 x 70 x 37 S-SFP-FE-LH40-SM1310 Specification Transceiver type eSFP Transmission speed 100 Mbit/s Center wavelength (nm) 1310 Standard compliance 100base-LX Connector type LC Applicable cable and maximum transmission distance Single-mode fiber: 40 km Transmit power (dBm) -5.0 to 0 Maximum receiver sensitivity (dBm) -37.0 Overload power (dBm) -10.0 Extinction ratio (dB) 10.5 Operating temperature 0C to 70C (32F to 158F) Net Dimension(D x W x H mm) 110 x 70 x 37
