Huawei Firewall USG6530E-AC ,USG6510E-AC Huawei Firewall USG6530E-AC​ ,USG6510E-AC Overview Huawei Firewall USG6530E-AC / USG6510E-AC host 10*GE RJ45+2*10GE SFP+,with the AC/DC adapter USG6510E-AC , USG6530E-AC rear panel Name Description Protective ground terminal The M4 OT terminal connects the PGND cable to the ground point of the cabinet, workbench, or wall, or the ground bar in equipment room. Clip hole The hole is used to install the power cable clip, which is used to bind and fix the power cable. Power receptacle The receptacle connects to the tuning fork plug of the power adapter. For details about the power adapter, see 36 W Power Adapter. 0 to 7 (RJ45) 8 10/100/1000M autosensing Ethernet electrical ports, numbered from GigabitEthernet 0/0/0 to GigabitEthernet 0/0/7. GigabitEthernet 0/0/0 is an inband management port and its default IP address is 192.168.0.1. After this port is connected to your PC through network cables, you can log in to the device using Telnet, STelnet, or web UI to configure or manage the device. 8 to 9 (WAN, RJ45) 2 10/100/1000M autosensing Ethernet electrical ports, numbered from GigabitEthernet 0/0/8 to GigabitEthernet 0/0/9. The device is connected to the WAN or cloud management platform using a network cable. 0 to 1 (10G, SFP+) 2 10GE autosensing Ethernet optical ports, numbered from XGigabitEthernet 0/0/0 to XGigabitEthernet 0/0/1. Compatible with GE Ethernet optical ports and supporting 1 Gbit/s SFP Optical/Electrical Modules, 1 Gbit/s eSFP Optical Modules and 10 Gbit/s SFP+ Optical Modules. Micro SD card slot The micro SD card slot allows you to insert a micro SD card to record logs and reports in real time. The micro SD card is optional. You can purchase one (BOM code: 06010308, model: SDSDQAE-064G, capacity: 64GB, dimensions (H x W x D): 1 mm x 15.00 mm x 11.00 mm/0.04 in. x 0.59 in. x 0.43 in. ) from Huawei if needed. You are advised to install an anti-theft board delivered with the device to protect the micro SD card. USB port USB ports allow you to insert USB devices for system software upgrades. For details on upgrades through USB devices, refer to the Upgrade Guide delivered with the device. RST button To restart the device, press the RST button. Ensure that the running configuration is saved before pressing the RST button. This button can enable you to restore the default settings with one click. To be specific, you can hold down the RST button for 5 seconds and then release it to restore the default settings and restart the device. Console port (RJ45) Console ports allow you to locally connect a PC to the device. You can use a console cable to connect the console port (RJ45) on the device to the COM port on your PC and use a serial port terminal program on your PC to access, configure, and manage the device. SN The serial number that uniquely identifies the device. When applying for a license file, you must provide the SN of the device. MAC The MAC address uniquely identifies the physical address of a device and must be provided during network forwarding configuration. Related products USG6670-BDL-AC USG6716E USG6585E USG6530E-AC USG6560E-AC USG6660-AC USG6655E-AC USG6635E-AC USG6510E-POE Shipment
