ES1D2X16SSC2 Huawei 16-Port 10GBASE-X Interface Card,SC,SFP+ Connector type ES1D2X16SSC2 Overview Huawei 16-Port 10GBASE-X Interface Card(SC,SFP+) ES1D2X16SSC2 Introduction The ES1D2X16SSC2 can be installed in: Slots 01 to 03 in an S7703 or S7703 PoE chassis. Slots 01 to 06 in an S7706 or S7706 PoE chassis. Slots 01 to 12 in an S7712 chassis. Functions of the ES1D2X16SSC2 Function Description Basic function Provides sixteen 10GE optical ports for data transmission and switching. Distributed forwarding Performs concurrent data forwarding using a distributed data plane. Software feature Service port clustering Hot swapping The ES1D2X16SSC2 is hot swappable. If service ports on the ES1D2X16SSC2 need to be used to set up a CSS, the card can only be installed in the S7712 or S7706 chassis and must use 10G optical modules and 10G cables. Indicators on the ES1D2X16SSC2 panel Number Indicator Color Description 1 ACT indicator of a lower optical port Yellow Blinking: The port is transmitting and receiving data. 2 ACT indicator of an upper optical port 3 LINK indicator of a lower optical port Green Steady on: A link has been established on the port. 4 LINK indicator of an upper optical port 5 RUN/ALM: running status indicator Green Steady on: The card has been powered on, but the software is not running. Slow blinking: The card software is running properly. Fast blinking: The card software is starting. Red Steady on: The card has failed and the fault requires manual intervention. Yellow Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.) Optical port attributes (10GE optical module, high-speed cable or SFP+ optical cable) Attribute Description Connector type SFP+ Optical port attributes Depend on the SFP+ - SFP+ high-speed cable (1 m, 3 m, 5 m, 10 m), QSFP+ - 4*SFP+ high-speed cable (1 m, 3 m, 5 m), SFP+ optical module, or SFP+ optical cable used. For the optical modules supported by the ES1D2X16SSC2 and their attributes, see 10GE SFP+ Optical Modules, 10GE-CWDM SFP+ Optical Modules and 10GE-DWDM SFP+ Optical Modules. Standards compliance IEEE 802.3ae Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol IP Specifications of the ES1D2X16SSC2 Item Description Physical specifications Dimensions (H x W x D): 35.1 mm x 394.7 mm x 426.8 mm (1.38 in. x 15.54 in. x 16.80 in.) Weight: 2.80 kg (6.17 lb) Maximum power consumption: 131 W Environment specifications Operating temperature: 0C to 45C (32F to 113F) Operating relative humidity: 5% RH to 95% RH (noncondensing) Storage temperature: -40C to +70C (-40F to +158F) Storage relative humidity: 5% RH to 95% RH (noncondensing)
