Cisco ASR 9010 Chassis ASR-9010-DC ASR-9010 DC Chassis 8 linecard slots ASR-9010-DC Overview The Cisco ASR 9000 Series Aggregation Services Routers (ASR 9000 Series) represent an exciting new paradigm in edge and core routing, with exceptional scalability, carrier-class reliability, environmentally conscious design, incredible flexibility, and an attractive price-to-performance benchmark. The Cisco ASR 9000 Series ASR-9010-DC also offers service and application-level intelligence focused on optimized video delivery and mobile aggregation. Finally, the Cisco ASR 9000 Series is designed to simplify and enhance the operational and deployment aspects of service-delivery networks. ASR-9010-DC Specification ASR-9010-DC specifications Description Cisco ASR 9010 chassis, ASR-9010-DC, ASR-9010 DC chassis Cisco ASR 9010 Specs Physical specifications Height: 36.75 in. (933.45 mm) (21 RU) Width: 17.38 in. (441.45 mm) Depth: в—Џ With doors: 29.03 in. (737.4 mm) в—Џ Without doors: 28.24 in. (717.3 mm) Weight: в—Џ 155.6 lb (70.73 kg) (chassis with PEM) 231.6 lb (105.27 kg) (fully loaded, excluding linecards and power modules) RSP, two v2 fan trays, PEMs Slot orientation Vertical Cisco ASR 9000 Series RSP Dual redundant RSPs with integrated fabric in 2 slots Cisco ASR 9000 Series line cards 8 line-card slots Commons components 2 RSPs 2 fan trays 2 PEMs (either DC or AC) 1 fan filter Reliability and availability Fabric redundancy Fan redundancy Feed redundancy Power-supply redundancy RSP redundancy Software redundancy Rack mounting 19-in. default 21- and 23-in. adapters available Note: Minimum 17.75-in. opening between posts is needed for proper operation Cabinet mounting Yes Note: Doors not recommended in enclosed cabinets Wall mounting No Airflow Front-to-back Performance Fabric One per RSP: в—Џ Active/active nonblocking operation mode in dual-RSP redundant configuration в—Џ Fully redundant in dual-RSP redundant configuration в—Џ Built-in service-intelligence and traffic-prioritization capability Thermal Two fan trays: в—Џ 12 high-efficiency fans per tray в—Џ Variable-speed fans for optimal thermal performance в—Џ No single point of failure Modularity Pay-as-you-grow power for future scalability, available in AC and DC. Multiple power module types: в—Џ 6 kW and 3 kW AC power modules в—Џ 4.4 kW and 2.1 kW DC power modules Note: Mixing of AC and DC modules is not supported Redundancy в—Џ AC: N+N redundancy в—Џ DC: N+1 redundancy в—Џ Power module redundancy в—Џ A/B Feed redundancy в—Џ PEM redundancy Power zones No power zone restrictions Fully load-sharing power infrastructure Power input Worldwide ranging AC (200-240V, 50-60 Hz, 16A maximum) Worldwide ranging DC (-40 to -72V, 50A nominal, 60A maximum) Power-module airflow Front-to-back Environmental Specifications Operating temperature (nominal) 41 to 104F (5 to 40C) Operating temperature (short-term) ASR 9006: 23 to 131F (-5 to 55C) ASR 9010: 23 to 122F (-5 to 50C) Operating humidity (nominal) (relative humidity) 5 to 90% Storage temperature -40 to 158F (-40 to 70C) Storage (relative humidity) 5 to 93% Operating altitude -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) Regulatory Compliance Network Equipment Building Standards (NEBS) Cisco ASR 9010 Routers are designed to meet: в—Џ SR-3580: NEBS Criteria Levels (Level 3) в—Џ GR-1089-CORE: NEBS EMC and Safety в—Џ GR-63-CORE: NEBS Physical Protection в—Џ VZ.TPR.9205: Verizon TEEER ETSI standards Cisco ASR 9010 Routers are designed to meet: в—Џ EN300 386: Telecommunications Network Equipment (EMC) в—Џ ETSI 300 019 Storage Class 1.1 в—Џ ETSI 300 019 Transportation Class 2.3 в—Џ ETSI 300 019 Stationary Use Class 3.1 EMC standards emission Cisco ASR 9010 Routers are designed to meet: в—Џ FCC Class 47CFR15 A в—Џ ICES 003 Class A в—Џ AS/NZS CISRP22 Class A в—Џ CISPR 22 (EN55022) Class A в—Џ VCCI Class A в—Џ BSMI Class A в—Џ IEC/EN 61000-3-12: Power Line Harmonics в—Џ IEC/EN 61000-3-11: Voltage Fluctuations and Flicker в—Џ EN55022: Information Technology Equipment (Emissions) в—Џ EN 50121-4: Railway EMC EMC standards immunity Cisco ASR 9010 Routers are designed to meet: в—Џ IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) в—Џ IEC/EN-61000-4-3: Radiated Immunity (10V/m) в—Џ IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) в—Џ IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) в—Џ IEC/EN-61000-4-5: Signal Surge Ports (1kV) в—Џ IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM) в—Џ IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) в—Џ IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) в—Џ IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations в—Џ EN55024: Information Technology Equipment (Immunity) в—Џ EN50082-1/EN-61000-6-1: Generic Immunity Standard в—Џ EN 50121-4: Railway EMC Safety Cisco ASR 9010 Routers are designed to meet: в—Џ UL/CSA/IEC/EN 60950-1 в—Џ IEC/EN 60825 Laser Safety в—Џ ACA TS001 в—Џ AS/NZS 60950 в—Џ FDA Code of Federal Regulations Laser Safety Related products ISR4321/K9 ISR4321-SEC/K9 ISR4321-V/K9 ISR4331-AX/K9 ISR4331-SEC/K9 ISR4331-VSEC/K9 ISR4351/K9 ISR4351-V/K9 ISR4351-AXV/K9 ISR4431-SEC/K9 ISR4431-V/K9 ISR4431-VSEC/K9 ISR4451-X/K9 ISR4451-X-V/K9 ISR4451-X-AX/K9
