C9300-48UXM-E Overview C9300-48UXM-E is the Catalyst 9300 switch, providing 48-port 2.5G (12 mGig) UPOE, and Network Essentials. Cisco Catalyst 9300 Series Switches are Ciscos lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industrys most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Ciscos lead enterprise architecture. At 480 Gbps, they are the industrys highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. Quick Spec Table 1 shows the quick spec. Model C9300-48UXM-E Total 10/100/1000 or Multigigabit copper ports 36x 100 Mbps,1G, 2.5G + 12x Multigigabit (100M, 1G, 2.5G, 5G, or 10 Gbps) Default AC power supply 1100W AC Available PoE power 490W Cisco StackWise-480 Yes Cisco StackPower Yes Switching capacity 580 Gbps Stacking bandwidth 480 Gbps Total number of MAC addresses 32,000 DRAM 8 GB Flash 16 GB Dimensions (H x W x D) Inches Chassis only: 1.73 x 17.5 x 19.1 W/ Default Power Supply: 1.73 x 17.5 x 22.2 W/ 1100W Power Supply: 1.73 x 17.5 x 22.2 The Options Table 2 shows the recommended hardware. Model Description C9300-NM-4G 9300 Series 4x 1G Network Module C9300-NM-4M 9300 Series 4 x Multigigabit Network Module C9300-NM-8X 9300 Series 8x 10G Network Module C9300-NM-2Q 9300 Series 2x 40G Network Module C9300-NM-2Y 9300 Series 2x 25G Network Module STACK-T1-50CM= 50CM Type 3 Stacking Cable STACK-T1-1M= 1M Type 3 Stacking Cable STACK-T1-3M= 3M Type 3 Stacking Cable SSD-120G Cisco pluggable USB3.0 SSD storage Compare to Similar Item Table 3 shows the comparison. Model C9300-48UXM-E C9300-24UX-E Total 10/100/1000 or Multigigabit copper ports 36x 100 Mbps,1G, 2.5G + 12x Multigigabit (100M, 1G, 2.5G, 5G, or 10 Gbps) 24 Multigigabit Cisco UPOE (100M, 1G, 2.5G, 5G, or 10 Gbps) Default AC power supply 1100W AC 1100W AC Available PoE power 490W 560W Cisco StackWise-480 Yes Yes Cisco StackPower Yes Yes C9300-48UXM-E Specification C9300-48UXM-E Specification General Device Type Switch - 48 ports - L3 - managed - stackable Enclosure Type Rack-mountable 1U Subtype 2.5 Gigabit Ethernet Ports 36 x 2.5GBase-T (UPOE) + 12 x 100/1000/2.5G/5G/10G (UPOE) Power Over Ethernet (PoE) UPOE PoE Budget 490 W Performance Switching capacity: 580 Gbps brvbar, Stacking bandwidth: 480 Gbps brvbar, Forwarding rate: 431.54 Mpps Capacity IPv4 routing table entries: 32000 brvbar, IPv6 routing table entries: 16000 brvbar, Flexible NetFlow entries: 64000 brvbar, VLAN IDs: 4000 brvbar, Switched virtual interfaces (SVIs): 2000 MAC Address Table Size 32000 entries Jumbo Frame Support 9198 bytes Routing Protocol OSPF, IS-IS, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng Remote Management Protocol SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF Encryption Algorithm 128-bit AES Features Trunking, full duplex mode, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, 16MB packet buffer, FTP client, 3 fans, Control plane protection (CoPP), Source-Specific Multicast (SSM), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Private VLAN Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at RAM 8 GB Flash Memory 16 GB Status Indicators Status Expansion / Connectivity Interfaces 36 x 2.5Gbit LAN RJ-45 UPOE brvbar, 12 x 1/2.5/5/10GBase-T UPOE brvbar, 1 x USB 2.0 Expansion Slots 1 (total) / 1 (free) x expansion slot Power Power Device Internal power supply - hot-plug Installed Qty 1 (installed) / 2 (max) Power Redundancy Optional Power Provided 1100 Watt Voltage Required AC 120/230 V (50 - 60 Hz) MTBF 202,160 hours Compliant Standards CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, CAN/CSA C22.2 No. 60950-1, VCCI Class A, EN 300386, EN 55022 Class A, FCC CFR47 Part 15 A, TVCN 7317, VCCI V-3/2009 Class A Dimensions Width 17.5 in Depth 18.5 in Height 1.7 in Miscellaneous Service Support Limited warranty - replacement - lifetime - response time: next business day brvbar, Technical support - consulting - 90 days Min Operating Temperature 23 F Max Operating Temperature 113 F Humidity Range Operating 5 - 90% (non-condensing) Min Storage Temperature 158 F Max Storage Temperature 104 F Humidity Range Storage 5 - 90% (non-condensing)
