C9120AXE - H - Cisco Catalyst 9120 WiFi 6 Access Point best price The Cisco Catalyst 9120 Series Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. Wi-Fi 6, 4x4:4 MIMO, H Domain. Cisco AP 9120 Series provides these features: Wi-Fi 6 (802.11ax) Cisco RF ASIC Uplink/downlink OFDMA MU-MIMO technology BSS coloring Target wake time Intelligent Capture Flexible Radio Assignment Dual 5-GHz radio support Smart antenna connector Cisco Mobility Express Multigigabit Ethernet support Bluetooth 5 Container support for applications Apple Features C9120AXE-H Specification Description Cisco Catalyst 9120AXE Series, H Domain Software Cisco Unified Wireless Network Software Release 8.9.x or later Cisco IOS XE Software Release 16.11 with AP Device Pack, or later Supported wireless LAN controllers Cisco Catalyst 9800 Series Wireless Controllers Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities 4x4 MIMO with four spatial streams Maximal Ratio Combining (MRC) 802.11n and 802.11a/g beamforming 20- and 40-MHz channels PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) support 802.11ac 4x4 downlink MU-MIMO with four spatial streams MRC 802.11ac beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support 802.11ax 4x4 downlink MU-MIMO with four spatial streams Uplink/downlink OFDMA TWT BSS coloring MRC 802.11ax beamforming 20-, 40-, 80-, and 160-MHz channels PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) 802.11 DFS CSD support Integrated antenna Flexible radio (either on 2.4GHz or on 5GHz) 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth Dedicated 5GHz radio 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth External antenna (sold separately) Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna Cisco offers the industrys broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios Supports Self-Identifiable Antennas (SIA) on one RP-TNC port Smart Antenna Connector Available on the 9120E and on the 9120P only Compact multi RF connector with DART interface Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio Interfaces 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45)IEEE 802.3bz Management console port (RJ-45) USB 2.0 @ 3.75W (enabled via future software) Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors Dimensions (W x L x H) Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7 (21.6 x 21.6 x 4.3 cm), C9120E and C9120P: 8.5 x 8.05x 2.0 (21.6 x 21.6 x 5.1 cm) Input power requirements 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE) Cisco power injector, AIR-PWRINJ6= 802.3af PoE Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Environmental Cisco Catalyst 9120AXI Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) Nonoperating (storage) altitude test: 25ЛљC, 15,000 ft. Operating temperature: 32 to 122F (0 to 50C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40ЛљC, 9843 ft. Note: When the ambient operating temperature exceeds 40C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, however, the USB interface will remain enabled Cisco Catalyst 9120AXE and 9120AXP Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) Nonoperating (storage) altitude test: 25ЛљC, 15,000 ft. Operating temperature: -4 to 122F (-20 to 50C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40ЛљC, 9843 ft. System memory 2048 MB DRAM 1024 MB flash Warranty Limited lifetime hardware warranty Available transmit power settings 2.4 GHz 23 dBm (200 mW) 20 dBm (100 mW) 17 dBm (50 mW) 14 dBm (25 mW) 11 dBm (12.5 mW) 8 dBm (6.25 mW) 5 dBm (3.13 mW) 2 dBm (1.56 mW) -1dBm (0.79mW) -4dBm(0.39mW) 5 GHz 26 dBm (400 mW) 23 dBm (200 mW) 20 dBm (100 mW) 17 dBm (50 mW) 14 dBm (25 mW) 11 dBm (12.5 mW) 8 dBm (6.25 mW) 5 dBm (3.13 mW) 2 dBm (1.56 mW) -1dBm (0.79mW) Frequency band and 20-MHz operating channels H (H regulatory domain): 2.412 to 2.472 GHz, 13 channels 5.180 to 5.320 GHz, 8 channels 5.745 to 5.825 GHz, 5 channels
