Huawei Firewall USG6650E-AC USG6650E-AC Overview Huawei Firewall USG6650E-AC 12*GE RJ45+12*10GE SFP+with 2*40GE QSFP+,2 AC power USG6650E-AC Interface description Name Description RST button To restart the device, press the RST button. Ensure that the running configuration is saved before pressing the RST button. This button can enable you to restore the default settings with one click. To be specific, you can hold down the RST button for 5 seconds and then release it to restore the default settings and restart the device. OFL button To remove a hard disk, press and hold the OFL button for four seconds until the OFL indicator turns on. HDD/SSD Hard disk slot, supporting one HDD-SATA1000G-A or SSD-Sata240G-A hard disk. The hard disks are optional. You can purchase hard disk from Huawei if needed. For details, see Hard Disk Unit HDD-SATA1000G-A and Hard Disk Unit SSD-Sata240G-A. 0 to 11 (RJ45) 12 10/100/1000M autosensing Ethernet electrical ports, numbered from GigabitEthernet 0/0/0 to GigabitEthernet 0/0/11. 0 to 11 (10G, SFP+) 12 10GE autosensing Ethernet optical ports, numbered from XGigabitEthernet0/0/0 to XGigabitEthernet0/0/11. Compatible with GE Ethernet optical ports and supporting 1 Gbit/s SFP Optical/Electrical Modules, 1 Gbit/s eSFP Optical Modules and 10 Gbit/s SFP+ Optical Modules. 0 to 1 (40G, QSFP+) Two 40GE Ethernet optical ports, numbered from 40GE0/0/0 to 40GE0/0/1. 40 Gbit/s QSFP+ Optical Modules is supported. USB 3.0 port USB ports allow you to insert USB 3.0 devices for system software upgrades. For details on upgrades through USB devices, refer to the Upgrade Guide delivered with the device. MGMT port Out-of-band 10/100/1000M RJ45 autosensing Ethernet management port. The interface number is METH 0/0/0 and the default IP address of the interface is 192.168.0.1. You can connect this port to the network port or any reachable port on a PC through a network cable. Then, you can use Telnet to access the CLI or use a web browser to access the web UI to configure, manage, and maintain the USG. Console port (RJ45) Console ports allow you to locally connect a PC to the device. You can use a console cable to connect the console port (RJ45) on the device to the COM port on your PC and use a serial port terminal program on your PC to access, configure, and manage the device. Related products USG6670-BDL-AC USG6716E USG6515E-AC USG6530E-AC USG6510E-AC USG6660-AC USG6655E-AC USG6635E-AC USG6620-AC Shipment
