HUAWEI UXCL TNZ2UXCL01 03032VFQ Huawei OSN 1800V Enhanced System Control unit Product Desription: TNZ2UXCL01 (Z2UXCL_Z1SCC_Z1STG) system control, cross-connect and clock board Logical Board on the NMS: Z2UXCL (TNZ2UXCL cross-connect board), Z1SCC (system control board), Z1STG (timing board) Apply to Huawei OSN 1800 II Enhanced Supports 1+1 hot backup Supports non-revertive manual and automatic switching Supports outband DCN, inband DCN, and ESC functions Supports extraction, insertion, and processing of SSM information and clock ID TNZ2UXCL01 (Z2UXCL_Z1SCC_Z1STG) is a system control, cross-connect and clock board applied to Huawei OSN 1800 II Enhanced. The logical slots for the TNZ2UXCL board on the NMS are slots 7 (07/17/27) and 8 (08/18/28). The TNZ2UXCL board can be configured as the Z2UXCL/Z1SCC/Z1STG logical boards to provide the functions of a system control, cross-connect, and timing board and implement cross-connection of ODUk (k = 0, 1, 2, 2e, flex)/VC-4/VC-3/VC-12 services and switching of packet services. Specification: System Control and Communication Unit Function and Feature Description Basic functions Grooms services, manages configurations, and reports alarms in a subrack. Backs up NE Data. When the data of an NE changes, the system control and communication unit immediately saves changed data to a storage medium to ensure that the NE data still exists after the NE undergoes a cold reset or power failure. This feature improves NE reliability. Implements communication between NEs through IP over DCC or HWECC. Protection Supports 1+1 hot backup. Supports non-revertive manual and automatic switching. DCN Supports outband DCN, inband DCN, and ESC functions. Fan alarm management Provides 1+1 power supplies to fans, supports fan speed adjustment and fan fault detection, and manages fan alarms Subrack fan operating mode configuration Supported Power supply management Checks whether the power input board can be detected Master/Slave subrack Not supported Cross-Connect Unit Function and Feature Description Basic functions Supports two cross-connect modes: O+P+S (OTN, packet, and SDH) mode and O+S (OTN and SDH) mode. O+P+S mode: Implements non-blocked cross-connections of 160 Gbit/s ODUk (k = 0, 1, 2, 2e, flex) signals. Cross-connects and schedules 50 Gbit/s VC-4s, and 20 Gbit/s VC-12s/VC-3s. Supports a packet service switching capacity of 160 Gbit/s. O+S mode: Implements non-blocked cross-connections of 200 Gbit/s ODUk (k = 0, 1, 2, 2e, flex) signals. Cross-connects and schedules 50 Gbit/s VC-4s, and 20 Gbit/s VC-12s/VC-3s. NOTE: In O+P+S mode, a chassis-level packet function license is provided, whereas in O+S mode, no chassis-level packet function license is provided Protection type Supports 1+1 hot backup. Energy Saving Only hot backup is supported. Clock Unit Function and Feature Description Basic functions Implements clock synchronization on an NE, and provides system clock signals and frame header signals for service boards. The clock signals comply with ITU-T G.813 and ITU-T G.823. Traces the external clock source, service clock source, or local clock source, and provides clock signals for itself and the system. Supports IEEE 1588v2 time and frequency synchronization. Supports G.8275.1. Supports G.8273.2. Other functions Supports extraction, insertion, and processing of SSM information and clock ID. Supports two external clocks by working with the TNF1AUX board. Mechanical Specifications Dimensions (W x H x D, unit: mm/in.) 193.8 x 22.4 x 205.9 (7.6 x 0.9 x 8.1) Weight 0.80kg (1.8lb.) Power Consumption Typical Power Consumption (W) 77 Maximum Power Consumptiona (W) 86 Product details: If you are interested, please let us know the specific model. We will provide the best service and the best price! Pr
