Cisco Catalyst 9100 Series Wi-Fi 6 Access Points C9115AXI-A Internal antenna, 4x4:4 MIMO, A Domain C9115AXI-A Overview Cisco Catalyst 9115 Series Wi-Fi 6 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. C9115AXI-A is the Cisco Catalyst 9115AX Series Access Point, Internal antenna, Wi-Fi 6, 4x4:4 MIMO, A Domain. Product Details Cisco AP 9115 series provides these features: - 802.11ax (Wi-Fi 6) - Uplink/downlink OFDMA - MU‑MIMO technology - BSS coloring - Target wake time - Cisco Mobility Express - Multigigabit Ethernet support - Bluetooth 5.0 - Apple Features C9115AXI-A Specification C9115AXI-A Specification Description Cisco Catalyst 9115AX Series Access Point, Internal antenna, Wi-Fi 6, 4x4:4 MIMO, A Domain Software ● Cisco Unified Wireless Network Software Release 8.9 or later ● Cisco IOS XE Software Release 16.11 or later Supported wireless LAN controllers ● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities ● 4x4 MIMO with four spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support 802.11ac ● 4x4 downlink MU-MIMO with four spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support 802.11ax ● 4x4 downlink MU-MIMO with four spatial streams ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support Integrated antenna ● 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth ● 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth External antenna (sold separately) ● Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) ● Cisco offers the industrys broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios Interfaces ● 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) IEEE 802.3bz ● Management console port (RJ-45) ● USB 2.0 (enabled via future software) Indicators ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors Dimensions (W x L x H) ● Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) Input power requirements ● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ) ● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. Environmental Cisco Catalyst 9115AXI ● Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. ● Operating temperature: 32 to 122F (0 to 50C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft. Note: When the ambient operating temperature exceeds 40C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE ● Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. ● Operating temperature: -4 to 122F (-20 to 50C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft. System memory ● 2048 MB DRAM ● 1024 MB flash Available transmit power settings 2.4 GHz ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) ● -1dBm (0.79mW) ● -4dBm (0.39mW) 5 GHz ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) ● -1dBm (0.79mW) ● -4dBm (0.39mW) Frequency band and 20-MHz operating channels A (A regulatory domain): ● 2.412 to 2.462 GHz, 11 channels ● 5.180 to 5.320 GHz, 8 channels ● 5.500 to 5.700 GHz, 8 channels (excludes 5.600 to 5.640 GHz) ● 5.745 to 5.825 GHz, 5 channels Business
