Wireless Access Point Specification Hardware Type Indoor AP Number of Radios 3 + 1 BLE Number of Antennas 3 Dual band Internal Wi-Fi + 1 BLE/ZigBee Antenna Type and Peak Gain PIFA antenna Dual band: 4.5dBi for 2.4Ghz and 5.5dBi for 5GHz BLE antenna 4.0dBi at 2.4GHz band Frequency Bands (GHz) 2.4002.4835, 5.1505.250, 5.2505.350, 5.4705.725, 5.7255.850 Radio 1 Capabilities Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service Radio 2 Capabilities Frequency band: 5.0GHz Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service Radio 3 Capabilities Frequency bands: 2.4GHz and 5.0GHz MIMO Chains: 1x1 Frequency Scanning Maximum Data Rate Radio 1: up to 574 Mbps Radio 2: up to 1201 Mbps Radio 3: Frequency scanning only Bluetooth Low Energy Radio Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power Interfaces 2x 10/100/1000 Base-T RJ45, 1x Type 2.0 USB, 1x RS-232 RJ45 Serial Port Power over Ethernet (PoE) 1 x 802.3at PoE default 1 x 802.af PoE no USB function Simultaneous SSIDs Up to 16 (14 if background scanning enabled) EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST User/Device Authentication WPA, WPA2, and WPA3 with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist allowlist Maximum Tx Power (Conducted) Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined) Radio 2: 5GHz: 22 dBm / 158 mW (2 chains combined) Radio 3: NA Kensington Lock Yes IEEE Standards 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az SSID Types Supported Local-Bridge, Tunnel, and Mesh Per Radio Client Capacity Up to 512 clients per radio (Radio1 and Radio2) Cellular Co-existence Yes Reset Button Yes LED Off Mode Yes OFDMA Yes Spatial Reuse (BSS Coloring) Yes UL MU-MIMO 802.11ax mode Yes DL-MU-MIMO Yes Enhanced Target Wake Time (TWT) Yes ZeroWait DFS/Agile DFS No Rogue Scan radio modes Background, Dedicated WIPS / WIDS radio modes Background, Dedicated (recommended) Packet Sniffer Mode Yes Spectrum Analyzer Yes Length x Width x Height 6.0 x 6.0 x 2.86 inches (153.2 x 153.2 x 53.0 mm) Mounting Options Ceiling, T-Rail, and Wall Included Accessories Standard Mount kit for Ceiling, T-Rail, and Wall Power Supply 802.3at PoE SP-FAP200-PA-XX or GPI-130 Power Consumption (Maximum) 17W Humidity 5 - 90% non condensing Operating / Storage Temperature 32122F (0 - 50C) / -22158F (-3070C) Directives Low Voltage Directive RoHS UL2043 Plenum Material No Mean Time Between Failures gt, 10 Years IP Rating N/A Surge Protection Built In Yes Hit-less PoE Failover N/A
