FAP-221E-C 531 Indoor Wireless AP 1x GE RJ45 Port 802 11 A/B/G/N/Ac Wave 2

FAP-221E-C 531 Indoor Wireless AP 1x GE RJ45 port 802 11 a/b/g/n/ac Wave 2: FAP-221E Specification FAP-221E Specification Hardware Hardware Type Indoor AP Number of Radios 2 + 1 BT/BLE Number of Antennas 4 Internal + 1 Internal BT/BLE Antenna Type and Peak Gain PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz Frequency Bands (GHz)* 2.4002.4835, 5.1505.250, 5.2505.350, 5.4705.725,5.7255.850 Radio 1 Capabilities 2.4 GHz b/g/n (2x2:2 stream) 20/40 MHz (256 QAM) Radio 2 Capabilities 5 GHz a/n/ac (2x2:2 stream) 20/40/80 MHz (256 QAM) Maximum Data Rate Radio 1: up to 400 Mbps Radio 2: up to 867 Mbps Bluetooth Low Energy (BT/BLE) Radio Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power Interfaces 1x 10/100/1000 Base-T RJ45 Power over Ethernet (PoE) IEEE 802.3af Simultaneous SSIDs 16 (14 if background scanning enabled) EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST User/Device Authentication WPA and WPA2 with 802.1x or Preshared key, WEP,Web Captive Portal, MAC blacklist whitelist Maximum Tx Power 2.4 GHz: 23 dBm / 200 mW (2 chains combined)* 5 GHz: 24 dBm / 251 mW (2 chains combined)* Kensington Lock Yes IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X,802.3af, 802.3az SSID Types Supported Local-Bridge, Tunnel, Mesh Per Radio Client Capacity Up to 512 Cellular Co-existence Yes LED Off Mode Yes Advanced 802.11 Features 802.11ac MU-MIMO Wave 2 Yes Transmit Beam Forming (TxBF) Yes Low-Density Parity Check (LDPC) Encoding Yes Maximum Likelihood Demodulation (MLD) Yes Maximum Ratio Combining (MRC) Yes A-MPDU and A-MSDU Packet Aggregation Yes MIMO Power Save Yes Short Guard Interval Yes Wireless Monitoring Capabilities Rogue Scan Radio Modes Background, Full-time WIPS / WIDS Radio Modes Background, Full-time Packet Sniffer Mode Yes Spectrum Analyzer Yes Dimensions Length x Width x Height 6.3 x 6.3 x 1.85 inches(160 x 160 x 47 mm) Mounting Options Ceiling, T-Rail, and Wall Included Accessories Mount kits for Ceiling, T-Rail, and Wall Environment Power Supply SP-FAP200-PA-XX, GPI-115,or GPI-130 Power Consumption (Max.) 12.36 W Humidity 590% non-condensing Operating / Storage Temperature -4113F (-2045C) /-40158F (-4070C) Directives Low Voltage Directive RoHS UL2043 Plenum Material Yes Mean Time Between Failures gt,30 Years IP Rating Surge Protection Built In Hit-less PoE Failover No Certifications Wi-Fi Alliance Certified Yes DFS FCC, IC, CE, Japan, Taiwan Warranty Limited Lifetime Warranty Yes * Frequency selection and power may be restricted to abide by regional regulatory compliance laws.