S6720-32C-PWH-SI-AC Huawei Network Switch 24 PoE++ 100M/1/2.5/5/10G ports,4 10 Gig SFP+, 1 AC S6720-32C-PWH-SI-AC Overview The S5720I-SI series switches (S5720I-SI for short) are next-generation standard gigabit Layer 3 Ethernet switches that provide flexible full gigabit access and cost-effective fixed GE ports and 10GE uplink ports. The S5720I-SI was developed based on next-generation high-performing hardware and the Huawei Versatile Routing Platform (VRP). The S5720I-SI supports simplified operations and maintenance (OM), intelligent stack (iStack) and flexible Ethernet networking. It also provides enhanced Layer 3 features and mature IPv6 features. The S5720I-SI supports high range of operating temperature, so the switch can be working in the outdoor cabinet in the very cold and very hot environments. S5720I-SI can be widely used in safe city, ETTx and other scenarios. S5720I-12X-PWH-SI-DC Specification Item Description Memory (RAM) 1 GB Flash 512 MB in total. To view the available flash memory size, run the display version command. Mean time between failures (MTBF) 22.7 years Mean time to repair (MTTR) 2 hours Availability gt, 0.99999 Service port surge protection Common mode: plusmn,7 kV Power supply surge protection Using 580 W AC or 1000 W AC power modules: plusmn,6 kV in differential mode, plusmn,6 kV in common mode Using 650 W DC power modules: plusmn,2 kV in differential mode, plusmn,4 kV in common mode Dimensions (H x W x D) 44.4 mm x 442.0 mm x 420.0 mm (1.75 in. x 17.4 in. x 16.5 in.) Weight (including package) 9.1 kg (20.06 lb) Stack ports Any MultiGE, 10GE SFP+, or 40GE QSFP+ ports (a maximum of 16 physical ports) RTC Supported RPS Not supported PoE Supported Rated voltage range 100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC Maximum voltage range 90 V AC to 264 V AC, 47 Hz to 63 Hz -38.4 V DC to -72 V DC Maximum power consumption (100% throughput, full speed of fans) Using 650 W DC or 580 W AC power modules: Not providing the PoE function: 125.6 W (without card) 100% PoE loads: 1017.2 W (system power consumption: 278 W, PoE: 739.2 W, without card) Using 1000 W AC power modules: Not providing the PoE function: 125.6 W (without card) 100% PoE loads: 1735 W (system power consumption: 295 W, PoE: 1440 W) Typical power consumption (30% of traffic load, tested according to ATIS standard) Using 650 W DC or 580 W AC power modules: 106.9 W (without card and PoE) Using 1000 W AC power modules: 121.6 W (without card and PoE) Operating temperature 0C to 45C (32F to 113F) at an altitude of 0-1800 m (0-5906 ft.) Short-term operating temperature -5C to +50C (23F to 122F) at an altitude of 0-1800 m (0-5906 ft.) Storage temperature -40C to +70C (-40F to +158F) Noise under normal temperature (27C, sound power) lt, 62.3 dB(A) Relative humidity 5% to 95%, noncondensing Operating altitude 0-5000 m (0-16404 ft.) Certification EMC certification Safety certification Manufacturing certification Part number 98010719 1 Twenty-four PoE++ 100M/1000M/2.5G/5G/10G BASE-T ports (MultiGE port) 2 Four 10GE SFP+ ports Applicable modules and cables: GE optical module GE-CWDM optical module GE-DWDM optical module GE copper module (100M/1000M auto-sensing) 10GE SFP+ optical module (OSXD22N00 not supported) 10GE-CWDM optical module 10GE-DWDM optical module 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables 3 m and 10 m SFP+ AOC cables 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, supported in V200R011C10 and later versions) 3 One PNP button 4 One console port 5 One ETH management port 6 One USB port 7 Ground screw 8 ESN label 9 Rear card slot 10 Fan slot 11 Power module slot 2 12 Power module slot 1 Related products S6720-32C-PWH-SI S6720-56C-PWH-SI-AC S6720-32C-SI-AC S6720S-26Q-SI-24S-AC S6720-54C-EI-48S-AC S6720-54C-EI-48S-DC S6720S-32X-LI-32S-AC S6720S-26Q-LI-24S-AC S6720S-26Q-EI-24S-AC S6720S-26Q-EI-24S-DC S6730S-S24X6Q-A S6720-54C-EI-48S-AC Shipping
