ISR4221-AX/K9 Overview Cisco 4221 Integrated Services router is design to deliver advanced services to the small enterprise branch environment. It delivers 35Mbps thoughtput by default. With pay-as-you-grow performance, you can increase forwarding capacity to 75Mbps by buying licenses. ISR4221-AX/K9 is the ISR4221 router with AX Bundle w/APP, and security license. The Modules, Cards and Accessories Table 2 shows some recommended modules, cards, and cables. tems Models Description Console and Auxillary Cables CAB-CONSOLE-RJ45 Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F Network Interface Modules NIM-1MFT-T1/E1 Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module NIM-ES2-4 Cisco 4000 Series Integrated Services Router 4-Port Gigabit Ethernet Switch Module layer 2 NIM-ES2-8 Cisco 4000 Series Integrated Services Router 8-Port Gigabit Ethernet Switch Module NIM SFPs for On-Board GE Ports GLC-LH-SMD Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM GLC-ZX-SMD Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM GLC-SX-M MD Cisco GLC-SX-M MD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM Compare to Similar Items Models ISR4221/K9 ISR4221-AX/K9 Description Cisco ISR 4221 (2GE,2NIM,4G FLASH,4G DRAM,IPB) Cisco ISR 4221 AX Bundle w/APP, SEC lic Aggregate Throughput 35 Mbps to 75 Mbps 35 Mbps to 75 Mbps Total onboard WAN or LAN 10/100/1000 ports 2 2 RJ-45-based ports 2 2 SFP-based ports 1 1 Enhanced service-module slots 0 0 NIM slots 2 2 Onboard ISC slot No No Rack height 1 1 ISR4221-AX/K9 Specification ISR4221-AX/K9 Specification Description Cisco ISR 4221 AX Bundle w/APP, SEC lic Aggregate Throughput 35 Mbps to 75 Mbps Total onboard WAN or LAN 10/100/1000 ports 2 RJ-45-based ports 2 SFP-based ports 1 Enhanced service-module slots 0 Doublewide service-module slots 0 NIM slots 2 OIR (all I/O modules) No Onboard ISC slot No Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) 4 GB Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) 4 GB Default memory DDR3 ECC DRAM (data plane) NA Maximum memory DDR3 ECC DRAM (data plane) NA Default memory DDR3 ECC DRAM (control/services plane) NA Maximum memory DDR3 ECC DRAM (control/services plane) NA Default flash memory 8 GB Maximum flash memory 8 GB External USB 2.0 slots (type A) 1 USB console port -type B mini (up to 115.2 kbps) 0 Serial console port - RJ45 (up to 115.2 kbps) 1 (combo CON/AUX port) Serial auxiliary port - RJ45 (up to 115.2 kbps) 1 (combo CON/AUX port) Power-supply options External: AC Only Redundant power supply N/A AC input voltage 100 to 240 VAC autoranging AC input frequency 47 to 63 Hz AC input current range, AC power supply (maximum) 1.5 to 0.6A AC input surge current 90 A peak and less than 3 Arms per half cycle Typical power (no modules) (watts) 24 Maximum power with AC power supply (watts) 90 Maximum power with PoE power supply (platform only) (watts) NA (no PoE support) Maximum endpoint PoE power available from PoE power supply (watts) NA (no PoE support)
