Huawei SmartAX MA5600T Single DC power Board H801MPWE FTTx and Cab New and Original in stock H801MPWE Overview The H801MPWE board is a power board with single DC power inputs. The H801MPWE board leads in the -48 V or -60 V DC power to the device.Functional SpecificationsThe H801MPWE board supports the following functions:One -48 V or -60 V DC power inputs (input voltage range: -38.4 V to -72 V)Filtering and current-limiting for the power input portDetection of power supply availability, and power supply faultsReporting of the protection alarmIndication of power statusBackup for the other boardH801MPWE Specification ItemMA5600T (ETSI)MA5600T (IEC)MA5603TMA5608TAppearanceSee product photoSupported cabinetIndoor cabinet: N63E-22, N66E-18Outdoor cabinet: F01T500, F01D2000Indoor cabinet: N66E-22Outdoor cabinet: noneIndoor cabinet: N66E-18Outdoor cabinet: F01T500, F01S300, F01T300Indoor cabinet: N63E-22Outdoor cabinet: F01S100, F01S200Board configuration2 slots for control boards16 slots for service boards1 slot for the universal interface board2 slots for upstream interface boards2 slots for power interface boards.2 slots for control boards14 slots for service boards1 slot for the universal interface board2 slots for upstream interface boards2 slots for power interface boards.2 slots for control boards6 slots for service boards1 slot for the universal interface board2 slots for upstream interface boards2 slots for power interface boards.2 slots for control boards2 slots for service boards1 or 2 slots for the power interface board.Supported control board and its switching capacitySCUB: 48 Gbit/sSCUF: 128 Gbit/sSCUN/SCUK: 480 Gbit/s in active/standby mode or 960 Gbit/s in load-sharing modeSCUH/SCUV: 960 Gbit/s in active/standby mode or 1920 Gbit/s in load-sharing modeMCUD/MCUD1/MCUE: 128 Gbit/s in active/standby mode or 256 Gbit/s in load-sharing modeSystem Layer 2 packet forwarding rateSCUB: 72 MppsSCUF: 190 MppsSCUN/SCUK: 726 Mpps in active/standby mode or 1452 Mpps in load-sharing modeSCUH/SCUV: 1428 Mpps in active/standby mode or 2856 Mpps in load-sharing modeMCUD/MCUD1/MCUE: 190 Mpps in active/standby mode or 380 Mpps in load-sharing modeSwitching/Forwarding delayShort forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 mu,s.BER in full loadBER of a port when the port transmits data in full load lt, 10 e-7System reliability specificationsSystem: redundant configuration.System availability for the typical configuration: gt, 99.999%Mean time between failures (MTBF): about 45 years.NOTE:Due to different network environments and different boards used by devices, the preceding MTBF (45 years) of the MA5600T/MA5603T/MA5608T is only for reference. The average repair time for field replaceable units (FRUs) is about 2 hours. The preceding values are only for reference. For details, contact the related Huawei engineers.Maximum number of ADSL2+ ports in a subrack1024896384128Maximum number of VDSL2 ports in a subrack1024896384128Maximum number of Vectoring ports in a subrack768768384N/AMaximum number of SuperVector ports in a subrackN/AN/A384N/AMaximum number of EFM SHDSL ports in a subrack51244819264Maximum number of TDM SHDSL ports in a subrack2562249632Maximum number of POTS ports in a subrack1024896384128Maximum number of ISDN BRA ports in a subrack51244819264Maximum number of ISDN PRA ports in a subrack64646464Maximum number of GPON ports in a subrack2562249632Maximum number of 10G GPON ports in a subrack1281124816Maximum number of P2P FE ports in a subrack76867228896Maximum number of P2P GE ports in a subrack76867228896Maximum number of upstream ports (GE ports in the GIU slot) in a subrack888N/AMaximum number of upstream ports (10GE ports in the GIU slot) in a subrack444N/AMaximum number of upstream ports (PON ports in the GIU slot) in a subrack111N/AMaximum number of upstream ports (ports on the control board) in a subrackSCUB/SCUF: 4 x GE (in the active/standby mode)SCUN/SCUK: 8 x GE (in the load-sharing mode)SCUH/SCUV: 8 x 10GE/GE (in the load-sharing mode)MCUD/MCUE: 8 x GE (in the load-sharing mode)MCUD1: 4 x GE + 4 x 10GE/GE (in the load-sharing mode)Maximum number of extended subracks connected to a master subrack323232N/AMaximum number of ONUs supported by each subrackFor Layer 2 applications, the maximum number of ONUs supported by each subrack is determined based on the number of MAC addresses and service flows supported by the control board, as well as the number of MAC addresses and service flows planned for the ONUs.For Layer 3 applications, the maximum number of ONUs supported by each subrack is determined based on the number of routes and ARP entries supported by the control board. Business
