Indoor Wireless FortiAP - Tri radio (2x 802.11 a/b/g/n/ac/ax 4x4 MIMO and 1x 802.11 a/b/g/n/ac Wave 2 2x2 MU-MIMO) internal antennas 1x 100/1000/2500 Base-T RJ45 1x 10/100/1000 Base-T RJ45 BT/BLE 1x T FortiAP-431F FortiAP-433F Hardware Hardware Type Indoor AP Indoor AP Number of Radios 3 + 1 BLE 3 + 1 BLE Number of Antennas 5 Internal + 1 BLE Internal 5 External (RP-SMA) + 1 BLE Internal Antenna Type and Peak Gain PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz Omni directional rubber duck antenna: 4 dBi for 2.4 GHz, 6 dBi for 5 GHz Frequency Bands (GHz) 2.4002.4835, 5.1505.250, 5.2505.350, 5.4705.725, 5.7255.850 Radio 1 Capabilities Frequency Band: 2.4 GHz Channel width: 4x4 20/40 MHz Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 MIMO chains: 4x4 service Radio 2 Capabilities Frequency Band: 5.0 GHz Channel width: 4x4 20/40/80MHz and 2x2 160MHz contiguous Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 Mimo chains: 4x4 service Radio 3 Capabilities Frequency band: 2.4/5.0 GHz MIMO chains: 1x1 frequency scanning Maximum Data Rate Radio 1: up to 1147 Mbps Radio 2: up to 2402 Mbps Radio 3: scan only Radio 1: up to 1147 Mbps Radio 2: up to 2402 Mbps Radio 3: scan only Bluetooth Low Energy Radio Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power Interfaces 1x 100/1000/2500 Base-T RJ45, 1 x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port Power over Ethernet (PoE) 802.3at PoE default 1 port powered by 802.3at or 2 ports powered by 802.3af - Full System functionality + USB support 1 port is connected to 802.3af - No USB support, Operate in 2x2 mode with reduced power R1/R2 17dBm(Tx power) Simultaneous SSIDs Up to 16 (14 if background scanning enabled) EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST User/Device Authentication WPA, WPA2, and WPA3 with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist Maximum Tx Power (Conducted) Radio 1: 2.4 GHz 24 dBm / 251 mW (4 chains combined)* Radio 2: 5 GHz 23 dBm / 200 mW (4 chains combined)* Radio 3: NA Kensington Lock Yes Yes IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz SSID Types Supported Local-Bridge, Tunnel, and Mesh Local-Bridge, Tunnel, and Mesh Per Radio Client Capacity 512 clients per radio (Radio1 and Radio2) 512 clients per radio (Radio1 and Radio2) Cellular Co-existence Yes Yes LED Off Mode Yes Yes Reset Button Yes Yes Advanced 802.11 Features OFDMA Yes (UL and DL) Yes (UL and DL) 2.4 GHz OFDMA Yes Yes Spatial Reuse (BSS Coloring) Yes Yes UL MU-MIMO 802.11ax mode Yes Yes DL-MU-MIMO Yes Yes HE-MU-MIMO Yes Yes Enhanced Target Wake Time (TWT) Yes Yes ZeroWait DFS/Agile DFS No No Wireless Monitoring Capabilities Rogue Scan radio modes Background, Dedicated Background, Dedicated WIPS / WIDS radio modes Background, Dedicated (recommended) Packet Sniffer Mode Yes Yes Spectrum Analyzer Yes Yes Dimensions Length x Width x Height 8.27 x 8.27 x 2.22 inches (210 x 210 x 56.5 mm) Weight 2.16 lbs (0.98 kg) 2.19 lbs (0.995 kg) Mounting Options Ceiling, T-Rail, and Wall Ceiling, T-Rail, and Wall Included Accessories Mount kit for Ceiling, T-Rail and Wall Mount kit for Ceiling, T-Rail and Wall. 5 RP-SMA Male dual-band dipole antenna Environment Power Supply SP-FAP400-PA-XX or GPI-130 SP-FAP400-PA-XX or GPI-130 Power Consumption (Maximum) 24.5 W Humidity 5 - 90% non condensing Operating / Storage Temperature 32113F (045C) / -31-94F (-3570C) Directives Low Voltage Directive RoHS UL2043 Plenum Material No No Mean Time Between Failures gt, 10 Years gt, 10 Years Surge Protection Built In Yes Yes Hit-less PoE Failover Yes Yes Certifications WiFi Alliance Certified Yes Yes DFS FCC, IC, CE, Japan, Korea, Taiwan Warranty Limited Lifetime Warranty Yes Yes Hardware Type Indoor AP Number of Radios 3 + 1 BLE Number of Antennas 3 Dual band Internal Wi-Fi + 1 BLE/ZigBee Antenna Type and Peak Gain PIFA antenna Dual band: 4.5dBi for 2.4Ghz and 5.5dBi for 5GHz BLE antenna 4.0dBi at 2.4GHz band Frequency Bands (GHz) 2.4002.4835, 5.1505.250, 5.2505.350, 5.4705.725, 5.7255.850 Radio 1 Capabilities Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service Radio 2 Capabilities Frequency band: 5.0GHz Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service Radio 3 Capabilities Frequency bands: 2.4GHz and 5.0GHz MIMO Chains: 1x1 Frequency Scanning Maximum Data Rate Radio 1: up to 574 Mbps Radio 2: up to 1201 Mbps Radio 3: Frequency scanning only Bluetooth Low Energy Radio Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power Interfaces 2x 10/100/1000 Base-T RJ45, 1x Type 2.0 USB, 1x RS-232 RJ45 Serial Port Power over Ethernet (PoE) 1 x 802.3at PoE default 1 x 802.af PoE no USB function Simultaneous SSIDs Up to 16 (14 if background scanning enabled) EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST User/Device Authentication WPA, WPA2, and WPA3 with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist allowlist Maximum Tx Power (Conducted) Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined) Radio 2: 5GHz: 22 dBm / 158 mW (2 chains combined) Radio 3: NA Kensington Lock Yes IEEE Standards 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az SSID Types Supported Local-Bridge, Tunnel, and Mesh Per Radio Client Capacity Up to 512 clients per radio (Radio1 and Radio2) Cellular Co-existence Yes Reset Button Yes LED Off Mode Yes Advanced 802.11 Features OFDMA Yes Spatial Reuse (BSS Coloring) Yes UL MU-MIMO 802.11ax mode Yes DL-MU-MIMO Yes Enhanced Target Wake Time (TWT) Yes ZeroWait DFS/Agile DFS No Wireless Monitoring Capabilities Rogue Scan radio modes Background, Dedicated WIPS / WIDS radio modes Background, Dedicated (recommended) Packet Sniffer Mode Yes Spectrum Analyzer Yes Dimensions Length x Width x Height 6.0 x 6.0 x 2.86 inches (153.2 x 153.2 x 53.0 mm) Weight 1.0 lbs (0.543 kg) Package (shipping) Weight 2.1lbs (0.95 kg) Mounting Options Ceiling, T-Rail, and Wall Included Accessories Standard Mount kit for Ceiling, T-Rail, and Wall Environment Power Supply 802.3at PoE SP-FAP200-PA-XX or GPI-130 Power Consumption (Maximum) 17W Humidity 5 - 90% non condensing Operating / Storage Temperature 32122F (0 - 50C) / -22158F (-3070C) Directives Low Voltage Directive RoHS UL2043 Plenum Material No Mean Time Between Failures gt, 10 Years IP Rating N/A Surge Protection Built In Yes Hit-less PoE Failover N/A Certifications WiFi Alliance Certified No DFS CE Warranty Limited Lifetime Warranty Yes
