ES0B00770600 Huawei S7700 Series switch S7706 Assembly Chassis in stock ES0B00770600 Overview The S7700 series flexible packet processing and traffic control capabilities can meet current and future service requirements, helping build a highly scalable network. The built-in native AC on S7700 series switches allows enterprises to build a wireless network without additional AC hardware. S7700 switch can manage up to 4K APs. It is a core switch that provides up to Tbit/s AC capabilities, avoiding the performance bottleneck on independent AC devices. The native AC capabilities help organizations better cope with challenges in the high-speed wireless era. The S7700 series unified user management function authenticates both wired and wireless users, ensuring a consistent user experience no matter whether they are connected to the network through wired or wireless access devices. The unified user management function supports various authentication methods, including 802.1x, MAC address, and Portal authentication, and is capable of managing users based on user groups, domains, and time ranges. These functions implement user and service management and enable the transformation from device-centric management to user-centric management. ES0B00770600 Specification Item S7703 S7706 S7712 Switching Capacity 1.92 Tbit/s 3.84 Tbit/s 3.84 Tbit/s Forwarding Performance 1,440 Mpps 2,880 Mpps 2,880 Mpps Service Slots 3 6 12 Redundancy Design Supervisors, power modules, CMUs, fans trays Wireless Network Management Native AC AP access control, AP region management, and AP profile management Radio profile management, uniform static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management Deployment of ACs on different network layers User Management Unified user management 802.1x, MAC address, and Portal authentication Traffic- and time-based accounting User authorization based on user groups, domains, and time ranges VLAN 4094 VLANs Access, trunk, and hybrid interface types, auto-negotiation of LNP links Default VLAN VLAN switching QinQ and selective QinQ MAC address-based VLAN assignment VxLAN NA VXLAN centralized gateway and distributed gateway BGP EVPN Configured through NETCONF protocol ARP 256K ARP entries MAC Address 1M MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses Limit on the number of MAC addresses learned on ports and VLANs Ring Protection STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) SEP BPDU protection, root protection, and loop protection BPDU tunnel ERPS (G.8032) IP Routing 1M IPv4 routing entries IPv4 routing protocols, such as RIP v1/v2, OSPF, BGP, and IS-IS IPv6 dynamic routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ Multicast 128,000 multicast routing entries IGMP v1/v2/v3 and IGMP v1/v2/v3 snooping PIM-DM, PIM-SM, and PIM-SSM MSDP and MBGP Fast leave Multicast traffic control Multicast querier Multicast packet suppression Multicast CAC Multicast ACL MPLS Basic MPLS functions MPLS OAM MPLS-TE MPLS VPN/VLL/VPLS CSS Switch Fabric Clustering CSS Switch Fabric Clustering (S7706 and S7712) Service Port Clustering Service Port Clustering (S7706 and S7712) Reliability LACP and E-Trunk between devices VRRP and BFD for VRRP BFD for BGP/IS-IS/OSPF/static route NSF and GR for BGP/IS-IS/OSPF/LDP TE FRR and IP FRR HSR Ethernet OAM (IEEE 802.3ah and 802.1ag) ITU-Y.1731 DLDP QoS 256K ACLs Traffic classification based on Layer 2 protocol packet header, Layer 3 protocol information, Layer 4 protocol information, and 802.1p priority ACL, CAR, re-marking, and scheduling Queue scheduling algorithms including PQ, WRR, DRR, PQ + WRR, and PQ + DRR Congestion avoidance mechanisms, such as WRED and tail drop HQoS Traffic shaping Configuration and Maintenance Zero-Touch Provisioning Console and SSH terminals Network management protocols, such as SNMP v1/v2c/v3 File uploading and downloading using FTP and TFTP BootROM upgrade and remote upgrade Hot patches User operation logs Open Programmability System (OPS) Security and Management 802.1x authentication and portal authentication MACSec NAC RADIUS and HWTACACS authentication Different user levels for commands, preventing unauthorized users from using certain commands Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks Ping and traceroute RMON Service Chain Secure Boot (need to use MPU that supports Secure Boot) Time synchronization IEEE 1588v2 SyncE Value-added Service* Firewall NAT NetStream IPSec Load balancing IPS Interoperability Supports VBST (compatible with PVST/PVST+/RPVST) Supports LNP (similar to DTP) Supports VCMP (similar to VTP) Energy Conservation IEEE 802.3az: Energy Efficient Ethernet (EEE) Dimensions (W x D x H) 442 mm x 489 mm x 175 mm, 4U 442 mm x 489 mm x 442 mm, 10U 442 mm x 489 mm x 664 mm, 15U Chassis Weight (empty) 10 kg 15 kg 37 kg Working Voltage DC: 38.4V to 72V Maximum Power 1,000W 2,200W 4,200W Maximum PoE Power 2,200W 8,800W 8,800W *The S7700 can be equipped with the NGFW and IPS cards. For more specification information, see the brochures of the cards. Business
