CE6810-48S4Q-EI Switch 48-Port 10GE SFP+, 4-Port 40GE QSFP+, Without Fan and Power Module. Product Code CE6810-48S4Q-EI Part Number 02358856 Software Version V100R003C00 and later Fixed GE interfaces None Fixed 10GE interfaces 48*10GE SFP+ Fixed 40GE interfaces 4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces. Fixed 100GE interfaces None Switching Capacity 1.28 Tbit/s Forwarding Rate 960 Mpps Rated voltage range(with power module) 100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC Maximum power consumption 238W Airflow Design Front-to-back or back-to-front Dimensions (W x D x H) 442 mm x 600 mm x 43.6 mm Weight (fully loaded) 10.4 kg (22.9 lb) CE6810-48S4Q-EI Specification 10G Base-T Ports 0 SFP+ Ports 48 QSFP+ Ports 4 Switching Capacity 1.28 Tbit/s Forwarding Rate 960 Mpps Airflow Design Front-to-back or back-to-front Device Virtualization iStack Super Virtual Fabric (SVF) Network Virtualization M-LAG TRILL (CE6810EI) VM Awareness Agile Controller Network Convergence FCoE DCBX, PFC, and ETS Programmability OpenFlow OPS Puppet and OVSDB plugins released on open source websites (CE6810EI) Linux container for open source and customization programming Traffic Analysis NetStream sFlow VLAN Adding access, trunk, and hybrid interfaces to VLANs Default VLAN QinQ MUX VLAN GVRP ACL Ingress: 2,250 Egress: 1,000 MAC Address Table Maximum: 64k Dynamic learning and aging of MAC addresses Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses MAC address limiting based on ports and VLANs ARP (maximum) 4k IPv4 FIB (maximum) 16k IP Routing IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (CE6810EI) IPv6 FIB (maximum) 8k Multicast FIB (maximum) 2k Multicast IGMP, PIM-SM, PIM-DM, MSDP, and MBGP (CE6810EI) IGMP snooping IGMP proxy (CE6810EI) Fast leave of multicast member interfaces (CE6810EI) Multicast traffic suppression (CE6810EI) Multicast VLAN (CE6810EI) Reliability LACP STP, RSTP, VBST, MSTP BPDU protection, root protection, and loop protection Smart Link and multi-instance DLDP ERPS (G.8032) VRRP, VRRP load balancing, and BFD for VRRP BFD for BGP/IS-IS/OSPF/Static route (CE6810EI) QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Actions of ACL, CAR, re-marking, and scheduling Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR Congestion avoidance mechanisms, including WRED and tail drop Traffic shaping Configuration and Maintenance Console, Telnet, and SSH terminals Network management protocols, such as SNMPv1/v2c/v3 File upload and download through FTP and TFTP BootROM upgrade and remote upgrade 802.3az Energy Efficient Ethernet (EEE) Hot patches User operation logs ZTP Security and Management 802.1x authentication Command line authority control based on user levels, preventing unauthorized users from using commands DoS, ARP, and ICMP attack defenses Port isolation, port security, and sticky MAC Binding of the IP address, MAC address, interface number, and VLAN ID Authentication methods, including AAA, RADIUS, and HWTACACS Remote Network Monitoring (RMON) Dimensions (W x D x H) 442 mm x 600 mm x 43.6 mm Weight (fully loaded) 10.4 kg (22.9 lb) Environmental Parameters Operating temperature: 0C to 40C (32F to 104F) (0m to 1,800m) Storage temperature: -40C to 70C (-40F to 158F) Relative humidity: 5% RH to 95% RH, non-condensing Operating Voltage AC: 90V to 290V DC: -38.4V to -72V Max. Power Consumption 238W
