CE6810-24S2Q-LI-F Huawei Network Switch 24-Port 10G SFP+,2-Port 40GE QSFP+,2*FAN Box Overview CE6810-24S2Q-LI-F is one of the Huawei CE6810-24S2Q-LI Series Switches. Huawei CE6810-24S2Q-LI Series Switches provide high-throughput, low-latency performance for data centers and high-end campus networks. 2 40 GE uplink ports enable exceptional performance when bridging with core switches using a Transparent Interconnection of Lots of Links (TRILL) network. Combine CE6800 and CE12800 switches to implement a non-blocking network platform. Huawei CloudEngine 6800 (CE6800) series switches are next-generation 10G Ethernet switches designed for data centers and high-end campus networks. Using the Huawei VRP8 software platform, CE6800 switches provide extensive data center service features and high stacking capability. In addition, the airflow direction (front-to-back or back-to-front) can be changed. CE6800 switches can work with CE12800 switches to build an elastic, virtualized, high-quality fabric that meets the requirements of cloud-computing data centers.o help enterprises and carriers build a scalable data center network platform in the cloud computing era. Specification CE6810-24S2Q-LI-F Specification 10G Base-T Ports 0 SFP+ Ports 24 QSFP+ Ports 2 Switching Capacity 640 Gbit/s Forwarding Rate 480 Mpps Airflow Design Front-to-back or back-to-front Device Virtualization iStack Super Virtual Fabric (SVF) Network Virtualization M-LAG VM Awareness Agile Controller Network Convergence FCoE DCBX, PFC, and ETS Programmability OpenFlow OPS Linux container for open source and customization programming Traffic Analysis NetStream sFlow VLAN Adding access, trunk, and hybrid interfaces to VLANs Default VLAN QinQ MUX VLAN GVRP ACL Ingress: 1,250 Egress: 500 MAC Address Table Maximum: 128k Dynamic learning and aging of MAC addresses Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses MAC address limiting based on ports and VLANs ARP (maximum) 1.5k IPv4 FIB (maximum) 1.5k IP Routing IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS IPv6 FIB (maximum) / Multicast FIB (maximum) / Multicast IGMP snooping Reliability LACP STP, RSTP, VBST, MSTP BPDU protection, root protection, and loop protection Smart Link and multi-instance DLDP ERPS (G.8032) VRRP, VRRP load balancing, and BFD for VRRP QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Actions of ACL, CAR, re-marking, and scheduling Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR Congestion avoidance mechanisms, including WRED and tail drop Traffic shaping Configuration and Maintenance Console, Telnet, and SSH terminals Network management protocols, such as SNMPv1/v2c/v3 File upload and download through FTP and TFTP BootROM upgrade and remote upgrade 802.3az Energy Efficient Ethernet (EEE) Hot patches User operation logs ZTP Security and Management 802.1x authentication Command line authority control based on user levels, preventing unauthorized users from using commands DoS, ARP, and ICMP attack defenses Port isolation, port security, and sticky MAC Binding of the IP address, MAC address, interface number, and VLAN ID Authentication methods, including AAA, RADIUS, and HWTACACS Remote Network Monitoring (RMON) Dimensions (W x D x H) 442 mm x 600 mm x 43.6 mm Weight (fully loaded) 10.1 kg (22.3 lb) Environmental Parameters Operating temperature: 0C to 40C (32F to 104F) (0m to 1,800m) Storage temperature: -40C to 70C (-40F to 158F) Relative humidity: 5% RH to 95% RH, non-condensing Operating Voltage AC: 90V to 290V DC: -38.4V to -72V Max. Power Consumption 171W Compare to Similar Items hows the comparison of CE6810-24S2Q-LI-F, CE6810-32T16S4Q-LI-B and CE6810-48S4Q-EI. Product Code CE6810-24S2Q-LI-B CE6810-32T16S4Q-LI-B CE6810-48S4Q-EI Software Version V100R005C10 and later V100R005C10 and later V100R003C00 and later Fixed 10GE interfaces 24*10GE SFP+ 32*10GBASE-T 16*10GE SFP+ 48*10GE SFP+ Fixed 40GE interfaces 2*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces. 4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces 4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces. Fixed 100GE interfaces None None None Switching Capacity 640 Gbit/s 1.28 Tbit/s 1.28 Tbit/s Forwarding Rate 480 Mpps 960 Mpps 960 Mpps Maximum power consumption 171W 288W 238W
