Huawei Data Center CE5850-48T4S2Q-HI 48-Port GE RJ45,4-Port 10GE SFP+,2-Port 40GE QSFP+,Without Fan and Power Module CE5850-48T4S2Q-HI Overview shows the Quick Specs. Product Code CE5850-48T4S2Q-HI Part Number 02358051 Software Version V100R003C00 and later Base-T Ports 48 SFP+ Ports 4 QSFP+ Ports 2 Switching Capacity 336 Gbit/s Forwarding Rate 252 Mpps Power module type Pluggable AC or DC power module, 1+1 backup supported Rated voltage range 100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC Maximum power consumption 131W Airflow Front-to-back or back-to-front Dimensions (W x D x H) 442 mm x 420 mm x 43.6 mm Weight (fully loaded) 8.8 kg (19.4 lb) Typic Power(W) 109 CE5850-48T4S2Q-HI Specification CE5850-48T4S2Q-HI Specification Base-T Ports 48 SFP+ Ports 4 QSFP+ Ports 2 Switching Capacity 336 Gbit/s Forwarding Rates 252 Mpps Airflow Design Front-to-back or back-to-front Device Virtualization iStack Super Virtual Fabric (SVF) Network Virtualization M-LAG TRILL (CE5855 CE5850) VM Awareness Agile Controller SDN Open Programmability System (OPS) Traffic Analysis NetStream sFlow VLAN Adding access, trunk, and hybrid interfaces to VLANs Default VLAN QinQ MUX VLAN GVRP ACL ingress: 2.25k egress: 1k MAC Address Table maximum: 128k Dynamic learning and aging of MAC addresses Static, dynamic, and black hole MAC address entries Packet filtering based on source MAC addresses MAC address limiting based on ports and VLANs ARP (maximum) 16k IPv4 FIB (maximum) 16k IP Routing IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (not supported by CE5855) IPv6 FIB (maximum) 8k IPv6 IPv6 Neighbor Discovery (ND) (not supported by CE5855) Path MTU Discovery (PMTU) (not supported by CE5855) TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 Multicast FIB (maximum) 4k Multicast IGMP, PIM-SM, PIM-DM, MSDP, and MBGP IGMP snooping IGMP proxy Fast leave of multicast member interfaces Multicast traffic suppression Multicast VLAN Reliability LACP STP, RSTP, VBST, MSTP BPDU protection, root protection, and loop protection Smart Link and multi-instance DLDP ERPS (G.8032) VRRP, VRRP load balancing, and BFD for VRRP BFD for BGP/IS-IS/OSPF/Static route QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Actions of ACL, CAR, re-marking, and scheduling Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR Congestion avoidance mechanisms, including WRED and tail drop Traffic shaping Configuration and Maintenance Console, Telnet, and SSH terminals Network management protocols, such as SNMPv1/v2c/v3 File upload and download through FTP and TFTP BootROM upgrade and remote upgrade 802.3az Energy Efficient Ethernet (EEE) Hot patches User operation logs Zero-Touch Provisioning (ZTP) Security and Management 802.1x authentication Command line authority control based on user levels, preventing unauthorized users from using commands DoS, ARP, and ICMP attack defenses Port isolation, port security, and sticky MAC Binding of the IP address, MAC address, interface number, and VLAN ID Authentication methods, including AAA, RADIUS, and HWTACACS Remote Network Monitoring (RMON) Dimensions (W x D x H) 442 mm x 420 mm x 43.6 mm Weight (fully loaded) 8.8 kg (19.4 lb) Environmental Parameters Operating temperature: 0C to 40C (32F to 104F) (0m to 1,800m) Storage temperature: -40C to 70C (-40F to 158F) Relative humidity: 5% to 95%, non-condensing Operating Voltage AC: 90V to 264V DC: -38.4V to -72V Maximum Power Consumption 131W Business
