ASR1001X 2.5G K9 Cisco Ethernet Switch Gigabit Wireless Poe Network Switch 24 Port (network switch 24 port optical fiber switch cisco catalyst switch) Product overview The Cisco ASR1001X-2.5G-K9 Router is a 24 port poe switch 1-rack-unit (1RU) platform targeted towards the low to medium Enterprise and Managed Service Provider use cases. Its compact form factor has a built-in Route Processor, Embedded Services Processor (ESP) and Shared Port Adapter (SIP) Interface processor. Product Code ASR1001X-2.5G-K9 Rack Height 1RU System Bandwidth 2.5G (default) / 5G, 10G, 20G (upgrade) Router Processor (RP) Quad-core 2.13Ghz processor Build-in Gigabit Ethernet port 6 x SFP ports, 2 x SFP+ ports SIP and Ethernet line card Integrated in chassis, not upgradable Embedded hardware-based encryption up to 8-Gbps crypto support throughput Rack-mounting 19-inch DRAM Memory 4 GB Flash Memory 8 GB Shared port adapters 1 SPA slot External USB flash memory 1-GB USB flash-memory support ASR1001X-2.5G-K9 Specification ASR1001X-2.5G-K9 Specifications Physical specifications Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details. Height: 1.71 in. (43.43 mm) Width: 17.3 in. (439.42 mm) Depth: 18.17 in. (461.5 mm) Weight: в—Џ 25 lb (11.35 kg) fully loaded Note: The Cisco ASR 1001-X Router has the route processor, ESP, and SIP integrated. Default memory 8-GB DRAM shared across route processor, ESP, and SIP Number of SIPs or Ethernet line cards supported Integrated in chassis Shared port adapters 1 single-height SPA slot Ethernet port adapters N/A Cisco ASR 1000 Series ESP Integrated in chassis Route processor Integrated in the chassis: Cisco ASR 1001-X Series Route Processor with Quad Core Processor Redundancy Software: Yes Built-in Gigabit Ethernet ports Yes: 6 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports Built-in 10 Gigabit Ethernet port Yes: Two 10 Gigabit Ethernet Small Form-Factor Plus Pluggable (SFP+) ports Note:Built-in 10-GB ports cannot be reduced to 1-GB speed. Network interface module Yes Cisco ASR 1000 Series Cisco ASR 1001-X ESP support Cisco ASR 1000 Series 2.5-Gbps ESP (default) Upgradable through a software-activated feature license to 5, 10, or 20 Gbps ESP bandwidth 2.5 to 20 Gbps ESP memory Share the same control memory on route processor SIPs and Ethernet line cards Integrated in chassis, not upgradable Embedded hardware-based encryption Yes: Up to 8-Gbps crypto support throughput Minimum Cisco IOS XE Software release Cisco IOS XE Software Release 3.12.0 Rack-mounting Yes: 19-inch Wall-mounting No External USB flash memory 1-GB USB flash-memory support Redundant power supply Yes: Dual power supplies by default, option of either AC or DC power supply Note: A mix of one AC and one DC power supply is not supported. Power input Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72V, 48V nominal) Power consumption в—Џ Maximum (DC): 242W в—Џ Maximum (AC): 250W в—Џ Maximum (out): 250W Airflow Front-to-back Operating temperature (nominal) 32 to 104F (0 to 40C) Operating temperature (short-term) 32 to 122F (0 to 50C) Operating humidity (nominal) (relative humidity) 10 to 85% Operating humidity (short-term) 5 to 90% Storage temperature -40 to 150F (-40 to 70C) Storage humidity (relative humidity) 5 to 95% Operating altitude -500 to 10,000 feet (152 to 3048 meters) Safety Standard UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1
