Cisco WS-C3750X-48P-L Catalyst 3750X 48 Port POE LAN Base WS - C3750X - 48P - L Stackable 48 10/100/1000 Ethernet PoE+ ports Four optional uplink network modules with GE or 10GE ports Industry first PoE+ with 30W power on all ports in 1 rack unit (RU) form factor Dual redundant, modular power supplies and fans Media Access Control Security (MACsec) hardware-based encryption Flexible NetFlow and switch-to-switch hardware encryption with the Service Module uplink USB Type-A and Type-B ports for storage and console respectively and an out-of-band Ethernet management port StackWise Plus Cisco StackPowerTM technology: An innovative feature and industry first for sharing power among stack members Cisco StackWise Plus technology for ease of use and resiliency with 64 Gbps of throughput Investment protection with backward compatibility with all other models of Cisco Catalyst 3750 Series Switches WS-C3750X-48P-L data sheet Manufacturer Cisco Systems, Inc Manufacturer Part Number WS-C3750X-48P-L Product Type Switch - 48 ports - Managed - stackable Form Factor Fixed, Rack Mountable 1U, Stackable/Clustering Switch Port density - Uplinks 48 x 10/100/1000 Ethernet Ports Power Over Ethernet (PoE) Yes Max Number of Stacks 9 Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, FTP, TFTP, SSH, CLI Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+ Features Hot swap module replacement, Layer 2 switching, dynamic IP address assignment , DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Per-VLAN Spanning Tree Plus (PVST+) Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at DRAM Memory 256 MB Flash Memory 128 MB Flash LED Status Lights Indicators Port status, link activity, port transmission speed, port duplex mode, power, system Connectivity / Expansion Slots Interfaces 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 - PoE USB : 1 x 4 PIN USB Type A 1 x console - mini-USB Type B - management 1 x RS-232 - RJ-45 - management 1 x 10Base-T/100Base-TX - RJ-45 - management Network stack device : 2 x Expansion Slots Total (Free) 1 ( 1 ) x Expansion Slot Power Supply Specifications Power Device Power supply - redundant - plug-in module Installed Qty 1 (installed) / 2 (max) Power Redundancy Optional Power Redundancy Scheme 1+1 (with optional power supply) Voltage Required AC 120/230 V ( 50/60 Hz ) Features Redundant Power System (RPS) connector Dimensions / Weight / Miscellaneous Width 44.5 cm Depth 46 cm Height 4.5 cm Weight 7.5 kg Rack Mounting Kit Optional MTBF 139,913 hour(s) Compliant Standards CE, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1 System Software Software Included Cisco IOS LAN Base Manufacturer Warranty Service Support Limited lifetime warranty Service Support Details Limited warranty - lifetime Limited warranty - power supply and fans - 5 years New releases update Our stock support good price C9115AXI-E Specification Description Cisco Catalyst 9115AX Series Access Point, Internal antenna, Wi-Fi 6, 4x4:4 MIMO, E Domain Software в—Џ Cisco Unified Wireless Network Software Release 8.9 or later в—Џ Cisco IOS XE Software Release 16.11 or later Supported wireless LAN controllers в—Џ Cisco Catalyst 9800 Series Wireless Controllers в—Џ Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities в—Џ 4x4 MIMO with four spatial streams в—Џ Maximal Ratio Combining (MRC) в—Џ 802.11n and 802.11a/g beamforming в—Џ 20- and 40-MHz channels в—Џ PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 Dynamic Frequency Selection (DFS) в—Џ Cyclic Shift Diversity (CSD) support 802.11ac в—Џ 4x4 downlink MU-MIMO with four spatial streams в—Џ MRC в—Џ 802.11ac beamforming в—Џ 20-, 40-, 80-, and 160-MHz channels в—Џ PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 DFS в—Џ CSD support 802.11ax в—Џ 4x4 downlink MU-MIMO with four spatial streams в—Џ Uplink/downlink OFDMA в—Џ TWT в—Џ BSS coloring в—Џ MRC в—Џ 802.11ax beamforming в—Џ 20-, 40-, 80-, and 160-MHz channels в—Џ PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 DFS в—Џ CSD support Integrated antenna в—Џ 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth в—Џ 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth External antenna (sold separately) в—Џ Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) в—Џ Cisco offers the industrys broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios Interfaces в—Џ 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) IEEE 802.3bz в—Џ Management console port (RJ-45) в—Џ USB 2.0 (enabled via future software) Indicators в—Џ Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors Dimensions (W x L x H) в—Џ Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) Input power requirements в—Џ 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ) в—Џ Cisco power injector, AIR-PWRINJ6= в—Џ 802.3af PoE в—Џ Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. Environmental Cisco Catalyst 9115AXI в—Џ Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) в—Џ Nonoperating (storage) altitude test: 25ЛљC, 15,000 ft. в—Џ Operating temperature: 32 to 122F (0 to 50C) в—Џ Operating humidity: 10% to 90% (noncondensing) в—Џ Operating altitude test: 40ЛљC, 9843 ft. Note: When the ambient operating temperature exceeds 40C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE в—Џ Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) в—Џ Nonoperating (storage) altitude test: 25ЛљC, 15,000 ft. в—Џ Operating temperature: -4 to 122F (-20 to 50C) в—Џ Operating humidity: 10% to 90% (noncondensing) в—Џ Operating altitude test: 40ЛљC, 9843 ft. System memory в—Џ 2048 MB DRAM в—Џ 1024 MB flash Available transmit power settings 2.4 GHz в—Џ 23 dBm (200 mW) в—Џ 20 dBm (100 mW) в—Џ 17 dBm (50 mW) в—Џ 14 dBm (25 mW) в—Џ 11 dBm (12.5 mW) в—Џ 8 dBm (6.25 mW) в—Џ 5 dBm (3.13 mW) в—Џ 2 dBm (1.56 mW) в—Џ -1dBm (0.79mW) в—Џ -4dBm (0.39mW) 5 GHz в—Џ 23 dBm (200 mW) в—Џ 20 dBm (100 mW) в—Џ 17 dBm (50 mW) в—Џ 14 dBm (25 mW) в—Џ 11 dBm (12.5 mW) в—Џ 8 dBm (6.25 mW) в—Џ 5 dBm (3.13 mW) в—Џ 2 dBm (1.56 mW) в—Џ -1dBm (0.79mW) в—Џ -4dBm (0.39mW) Frequency band and 20-MHz operating channels E (E regulatory domain): в—Џ 2.412 to 2.472 GHz, 13 channels в—Џ 5.180 to 5.320 GHz, 8 channels в—Џ 5.500 to 5.700 GHz, 8 channels (excludes 5.600 to 5.640 GHz) C9115AXI-E Specification Description Cisco Catalyst 9115AX Series Access Point, Internal antenna, Wi-Fi 6, 4x4:4 MIMO, E Domain Software в—Џ Cisco Unified Wireless Network Software Release 8.9 or later в—Џ Cisco IOS XE Software Release 16.11 or later Supported wireless LAN controllers в—Џ Cisco Catalyst 9800 Series Wireless Controllers в—Џ Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities в—Џ 4x4 MIMO with four spatial streams в—Џ Maximal Ratio Combining (MRC) в—Џ 802.11n and 802.11a/g beamforming в—Џ 20- and 40-MHz channels в—Џ PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 Dynamic Frequency Selection (DFS) в—Џ Cyclic Shift Diversity (CSD) support 802.11ac в—Џ 4x4 downlink MU-MIMO with four spatial streams в—Џ MRC в—Џ 802.11ac beamforming в—Џ 20-, 40-, 80-, and 160-MHz channels в—Џ PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 DFS в—Џ CSD support 802.11ax в—Џ 4x4 downlink MU-MIMO with four spatial streams в—Џ Uplink/downlink OFDMA в—Џ TWT в—Џ BSS coloring в—Џ MRC в—Џ 802.11ax beamforming в—Џ 20-, 40-, 80-, and 160-MHz channels в—Џ PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 DFS в—Џ CSD support Integrated antenna в—Џ 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth в—Џ 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth External antenna (sold separately) в—Џ Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) в—Џ Cisco offers the industrys broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios Interfaces в—Џ 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) IEEE 802.3bz в—Џ Management console port (RJ-45) в—Џ USB 2.0 (enabled via future software) Indicators в—Џ Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors Dimensions (W x L x H) в—Џ Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) Input power requirements в—Џ 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ) в—Џ Cisco power injector, AIR-PWRINJ6= в—Џ 802.3af PoE в—Џ Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. Environmental Cisco Catalyst 9115AXI в—Џ Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) в—Џ Nonoperating (storage) altitude test: 25ЛљC, 15,000 ft. в—Џ Operating temperature: 32 to 122F (0 to 50C) в—Џ Operating humidity: 10% to 90% (noncondensing) в—Џ Operating altitude test: 40ЛљC, 9843 ft. Note: When the ambient operating temperature exceeds 40C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE в—Џ Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) в—Џ Nonoperating (storage) altitude test: 25ЛљC, 15,000 ft. в—Џ Operating temperature: -4 to 122F (-20 to 50C) в—Џ Operating humidity: 10% to 90% (noncondensing) в—Џ Operating altitude test: 40ЛљC, 9843 ft. System memory в—Џ 2048 MB DRAM в—Џ 1024 MB flash Available transmit power settings 2.4 GHz в—Џ 23 dBm (200 mW) в—Џ 20 dBm (100 mW) в—Џ 17 dBm (50 mW) в—Џ 14 dBm (25 mW) в—Џ 11 dBm (12.5 mW) в—Џ 8 dBm (6.25 mW) в—Џ 5 dBm (3.13 mW) в—Џ 2 dBm (1.56 mW) в—Џ -1dBm (0.79mW) в—Џ -4dBm (0.39mW) 5 GHz в—Џ 23 dBm (200 mW) в—Џ 20 dBm (100 mW) в—Џ 17 dBm (50 mW) в—Џ 14 dBm (25 mW) в—Џ 11 dBm (12.5 mW) в—Џ 8 dBm (6.25 mW) в—Џ 5 dBm (3.13 mW) в—Џ 2 dBm (1.56 mW) в—Џ -1dBm (0.79mW) в—Џ -4dBm (0.39mW) Frequency band and 20-MHz operating channels E (E regulatory domain): в—Џ 2.412 to 2.472 GHz, 13 channels в—Џ 5.180 to 5.320 GHz, 8 channels в—Џ 5.500 to 5.700 GHz, 8 channels (excludes 5.600 to 5.640 GHz) C9115AXI-E Specification Description Cisco Catalyst 9115AX Series Access Point, Internal antenna, Wi-Fi 6, 4x4:4 MIMO, E Domain Software в—Џ Cisco Unified Wireless Network Software Release 8.9 or later в—Џ Cisco IOS XE Software Release 16.11 or later Supported wireless LAN controllers в—Џ Cisco Catalyst 9800 Series Wireless Controllers в—Џ Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller 802.11n version 2.0 (and related) capabilities в—Џ 4x4 MIMO with four spatial streams в—Џ Maximal Ratio Combining (MRC) в—Џ 802.11n and 802.11a/g beamforming в—Џ 20- and 40-MHz channels в—Џ PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 Dynamic Frequency Selection (DFS) в—Џ Cyclic Shift Diversity (CSD) support 802.11ac в—Џ 4x4 downlink MU-MIMO with four spatial streams в—Џ MRC в—Џ 802.11ac beamforming в—Џ 20-, 40-, 80-, and 160-MHz channels в—Џ PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 DFS в—Џ CSD support 802.11ax в—Џ 4x4 downlink MU-MIMO with four spatial streams в—Џ Uplink/downlink OFDMA в—Џ TWT в—Џ BSS coloring в—Џ MRC в—Џ 802.11ax beamforming в—Џ 20-, 40-, 80-, and 160-MHz channels в—Џ PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) в—Џ Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) в—Џ 802.11 DFS в—Џ CSD support Integrated antenna в—Џ 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth в—Џ 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth External antenna (sold separately) в—Џ Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) в—Џ Cisco offers the industrys broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios Interfaces в—Џ 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) IEEE 802.3bz в—Џ Management console port (RJ-45) в—Џ USB 2.0 (enabled via future software) Indicators в—Џ Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors Dimensions (W x L x H) в—Џ Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) Input power requirements в—Џ 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ) в—Џ Cisco power injector, AIR-PWRINJ6= в—Џ 802.3af PoE в—Џ Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. Environmental Cisco Catalyst 9115AXI в—Џ Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) в—Џ Nonoperating (storage) altitude test: 25ЛљC, 15,000 ft. в—Џ Operating temperature: 32 to 122F (0 to 50C) в—Џ Operating humidity: 10% to 90% (noncondensing) в—Џ Operating altitude test: 40ЛљC, 9843 ft. Note: When the ambient operating temperature exceeds 40C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE в—Џ Nonoperating (storage) temperature: -22 to 158F (-30 to 70C) в—Џ Nonoperating (storage) altitude test: 25ЛљC, 15,000 ft. в—Џ Operating temperature: -4 to 122F (-20 to 50C) в—Џ Operating humidity: 10% to 90% (noncondensing) в—Џ Operating altitude test: 40ЛљC, 9843 ft. System memory в—Џ 2048 MB DRAM в—Џ 1024 MB flash Available transmit power settings 2.4 GHz в—Џ 23 dBm (200 mW) в—Џ 20 dBm (100 mW) в—Џ 17 dBm (50 mW) в—Џ 14 dBm (25 mW) в—Џ 11 dBm (12.5 mW) в—Џ 8 dBm (6.25 mW) в—Џ 5 dBm (3.13 mW) в—Џ 2 dBm (1.56 mW) в—Џ -1dBm (0.79mW) в—Џ -4dBm (0.39mW) 5 GHz в—Џ 23 dBm (200 mW) в—Џ 20 dBm (100 mW) в—Џ 17 dBm (50 mW) в—Џ 14 dBm (25 mW) в—Џ 11 dBm (12.5 mW) в—Џ 8 dBm (6.25 mW) в—Џ 5 dBm (3.13 mW) в—Џ 2 dBm (1.56 mW) в—Џ -1dBm (0.79mW) в—Џ -4dBm (0.39mW) Frequency band and 20-MHz operating channels E (E regulatory domain): в—Џ 2.412 to 2.472 GHz, 13 channels в—Џ 5.180 to 5.320 GHz, 8 channels в—Џ 5.500 to 5.700 GHz, 8 channels (excludes 5.600 to 5.640 GHz) C1000-48P-4G-L C9500-NM-8X CAB-SPWR-30CM C1000-48T-4G-L C9800-F-X-K9 C9200L-STACK-KIT WS-C2960X-24TS-LL N9K-C93180YC-FX PWR-C4-950WAC-R WS-C2960X-24PSQ-L N3K-C3172PQ-XL C9200-NM-4G WS-C2960X-24PS-L N2K-C2348UPQ C9200-NM-4X WS-C2960X-48TS-L AIR-AP1832I-H-K9 C9300-NM-4G WS-C2960L-24PS-AP AIR-AP2802I-H-K9 C9300-NM-8X WS-C2960L-16TS-LL C9115AXI-H GLC-LH-SMD WS-C2960L-8TS-LL C9120AXI-H SFP-10G-SR WS-C3560-48FS-S AIR-AP1562I-H-K9 SFP-10G-LR WS-C2960X-24PS-L AIR-AP1562D-H-K9 SFP-10G-SR-S C9200L-48P-4X-E C9800-L-C-K9 SFP-10G-LR-S C9200L-48P-4G-E C9800-L-F-K9 GLC-TE C9200L-24T-4G-E AP505 SFP-H10GB-CU2M C9300-24T-A AP515 MA-CBL-40G-3M C9300-48T-A CP-3905 GLC-LH-SMD= C9300-24S-A CP-7821-K9 ISR4331/K9 C9300-48S-A CP-8832-MIC-WIRED ISR4331/K9 RF C9300-48P-E CS-MIC-TABLE-J FPR2110-ASA-K9 C9300-24P-E AIR-AP3802I-E-K9 FPR2110-ASA-K9 C9300L-24T-4G-E C1111-8P FPR2120-ASA-K9 C9300L-48T-4G-E PWR-C5-125WAC FPR2130-ASA-K9 C9300-NM-8X PWR-C5-1KWAC C9200-NM-4G= C9400-LC-24S PWR-C6-125WAC C9200-NM-4G= C9400-LC-48S STACK-T1-50CM C9200L-24P-4G-CE C9500-24Y4C-A STACK-T1-1M C9200L-24P-4G-CE C9500-48Y4C-A STACK-T1-3M C9200L-48P-4G-E
