Huawei AP3010DN-V2 Dual-band Wireless Ceiling Access Point AP3010DN-V2 Indoor Access Points Product Description Item Description Interface type 1 x 10/100/1000M port that connects to the wired Ethernet and supports PoE input. LED indicator Indicates the power-on, startup, running, alarm, and fault status of the system. Antenna type Built-in dual-band omnidirectional antennas Antenna gain 2.4G: 4 dBi 5G: 6 dBi Maximum number of VAPs for each radio 16 Maximum number of users Fit AP: le, 128 Fat AP: le, 64 Maximum transmit power 2.4G: 23 dBm (combined power) 5G: 23 dBm (combined power) NOTE The actual transmit power depends on local laws and regulations. Maximum number of non-overlapping channels 2.4 GHz (2.412 GHz to 2.472 GHz) * 802.11b/g * 20 MHz: 3 * 802.11n * 20 MHz: 3 * 40 MHz: 1 5 GHz (5.18 GHz to 5.825 GHz) * 802.11a * 20 MHz: 13 * 802.11n * 20 MHz: 13 * 40 MHz: 6 * 802.11ac * 20 MHz: 13 * 40 MHz: 6 * 80 MHz: 3 NOTE The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes Channels Compliance. Channel rate supported 802.11b: 1, 2, 5.5, and 11 Mbit/s 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s 802.11n: 6.5 to 300 Mbit/s 802.11ac: 6.5 to 867 Mbit/s System memory 256 MB DDR2 32 MB flash Power input DC: 12 V plusmn, 10% PoE power supply: in compliance with IEEE 802.3af/at Maximum power consumption 10.2 W NOTE The actual maximum power consumption depends on local laws and regulations. Operating temperature and altitude -60 m to +1800 m: -10C to +50C 1800 m to 5000 m: Temperature decreases by 1C every time the altitude increases 300 m. Storage temperature 40C to +70C Operating humidity 5% to 95% (non-condensing) IP rating IP41 Atmospheric pressure 70 kPa to 106 kPa Weight 0.4 kg Dimensions (H x W x D) 39.5 mm x 180 mm x 180 mm
