SPA-8XCHT1/E1 Cisco SPA Card Shared 8 Port Channelized T1/E1 Adapter RJ-45 Connector

SPA-8XCHT1/E1 Cisco SPA Card Shared 8 Port Channelized T1/E1 Adapter RJ-45 connector SPA-8XCHT1/E1 Overview The Cisco 8-Port Channelized T1/E1 SPA SPA-8XCHT1/E1 provides one of the greatest densities currently offered in the industry at 8 ports per SPA and up to 32 ports per SIP. At a cost per T1/E1 port less than that of a standard serial port with external channel service unit/data service unit (CSU/DSU), the Cisco 8-Port Channelized T1/E1 SPA is cost-effective for all WAN connectivity. The Cisco 8-Port Channelized T1/E1 SPA provides one of the greatest densities currently offered in the industry at 8 ports per SPA and up to 32 ports per SIP. At a cost per T1/E1 port less than that of a standard serial port with external channel service unit/data service unit (CSU/DSU), the Cisco 8-Port Channelized T1/E1 SPA is cost-effective for all WAN connectivity. The SPA is designed to provide a full 8-port channelized solution for the Cisco 6500,7600 and the 12000 Series Routers. The interfaces can be channelized, fractional, or unframed (E1) with up to 256 independent High-Level Data Link Control (HDLC) channels definable for T1 and E1 applications. With these capabilities, the SPA eliminates the need for separate interface types for separate connection requirements. Multilink Point-to-Point Protocol (MLPPP) is supported (in hardware) to enable link aggregation greater than T1 capacity. Up to eight individual T1s can be combined within a multilink bundle that appears to be a single IP link. This enables service providers to provision greater-than-T1 bandwidth incrementally, without requiring migration of the circuit and customer premises equipment (CPE) infrastructure to T3 facilities. The Cisco 8-Port Channelized T1/E1 SPA is hot-swappable and supports service-transparent online insertion and removal (OIR), allowing removal of the SPA without impacting the interface processor and other SPAs. SPA-8XCHT1/E1 Specification SPA-8XCHT1/E1 specifications Description Cisco ASR 9000 Adapter, SPA-8XCHT1/E1, 8-port Channelized T1/E1 to DS0 Shared Port Adapter Product Name Cisco 8-Port Channelized T1/E1 Shared Port Adapter Product compatibility Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco 12000 Series Routers Cisco XR 12000 Series Routers Cisco ASR 1000 Series Router Cisco ASR 9000 Series Router Port density per SPA 8 ports Physical interface RJ-45 connector RJ-45 to BNC adapter cable option Protocols Encapsulation protocols: HDLC Point-to-Point Protocol (PPP), RFC 1662 Frame Relay, RFC 1490 Multilink support: MLPPP, RFC 1990 MLFR, FRF.16 LFI over Frame Relay (FRF.12) and MLPPP Features and functions Up to 8 independent T1 or E1 ports configurable as either all T1 or all E1 only Full-duplex connectivity Channelized and fractional T1/E1, clear channel E1 supported Up to 256 usable n x 64K, where n is 1 to 24 for T1 and 1 to 32 for E1 Line-rate performance for all ports channelized to DS-0 Integrated CSUs/DSUs Internal or network clocking selectable on each port Per-port, dual-color status LED Loopback capabilities: Local and remote loopback at the T1/E1 level Response to embedded loopback commands Insertion of loopback commands into transmitted signal N x DS-0 system-side loopback Bit-error-rate-testing (BERT) pattern generation and detection per channel (maximum of 6 T1/E1 at a time) Programmable pseudorandom pattern up to 32 bits long, including all 0s, all 1s, 211, 215, 220, 220 Quasi-Random Signal Sequence (QRSS), 223, alternating 0s and 1s, 1-in-8, and 3-in-24 32-bit error-count and bit-count registers Fully independent transmit and receive sections Detection of test patterns with bit error rates up to 10-2 24-hour history maintained for error statistics and failure counts, at 15-minute intervals 16- and 32-bit cyclic redundancy check (CRC), 16-bit default T1-specific features Data rate to 1.536 Mbps per port Impedance: 100 ohms D4 Super Frame (SF) or Extended Super Frame (ESF) framing Alternate mark inversion (AMI) or binary 8-zero substitution (B8ZS) line encoding ANSI T1.403 and ATT TR 54016 Facility Data Link (FDL) Selectable T1 cable length in increments from 0 to 655 feet Selectable T1 CSU line build-out (LBO): 0, -7.5, -15, and -22.5 dB Selectable T1 CSU receiver gain: 26 or 36 dB Alarm monitoring: Alarm indication signal (AIS) Out of frame (OOF) Far-end alarm failure (yellow or distant alarm) Performance data collection: CRC and bit errors Framing bit errors Line errored seconds Far-end errored seconds Far-end severely errored seconds Far-end unavailable seconds Line coding violation (LCV) E1-specific features Data rate to 2.048 Mbps (unframed mode) or 1.984 Mbps (framed mode) per port Impedance: 120 ohms (RJ-45 to BNC adapter cable offers 75-ohm configuration option) Unframed E1, CRC4, or non-CRC4 framing High-density bipolar with three zeroes (HDB3) line encoding Alarm monitoring: AIS OOF Remote alarm indication (RAI) Performance data collection: CRC and bit errors Framing bit errors Far-end block error (FEBE) LCV Reliability and availability OIR Single SPA software reset MIBs RFC 1406 MIB Network management Simple Network Management Protocol (SNMP) Compliance and agency approvals CE Marking Safety UL 60950 CSA 22.2 No.60950 IEC 60950 EN 60950 AS/NZS 3260 TS001 EMC CFR47 Part 15 ICES 003 EN55022 CISPR 22 AS/NZ 3548 VCCI EN55024 EN50082-1 EN61000-6-1 Telecom (T1) ANSI T1.403 Telecom (E1) ITU G.703 G.704 G.706 Environmental specifications Operating temperature: 41 to 104F (5 to 40C) Storage temperature: -38 to 150F (-40 to 70C) Operating humidity: 5 to 85% relative humidity Storage humidity: 5 to 95% relative humidity FAQ 1. Where do your products come from? All of our products are from Cisco/Huawei distribution , Cisco/Huawei partner directly. We are Cisco partner at local, with cisco verified certification. 2. If all equioments I can buy service from local cisco ? For all equipments you can buy service from local, because our goods are smart net free, all with clean serial number. 3. How to ship the goods? Lonrise work with DHL,FEDEX,UPS and TNT. Your order will be dispatched by express delivery door to door. 4. Whats your payment term? We always accept 10% advance payment. For long term cooperation, we can consider to apply credit accordingly. Related products SPA-1XCHOC12/DS0 SPA-2X1GE-V2 SPA-8XCHT1/E1-V2 SPA-1XOC48POS/RPR SPA-4X1FE-TX-V2 SPA-10X1GE-V2 SPA-5X1GE-V2 SPA-2XOC48POS/RPR SPA-4XCT3DS0 Sales: Yolanda Mob/Whatsapp: +8618258465246 Email: yolanda@lonriseequipment.com Skype: Yolanda-Lonrise