SPA-4XCT3/DS0 Cisco SPA Card 4-port Channelized T3 To DS0 Shared Port Adapter SPA-4XCT3/DS0 Overview SPA-4XCT3/DS0 is a Cisco Router Shared Port Adapter. The Cisco Channelized T3 SPA Version 2 is available in 2- and 4-port options. The ports can be independently configured as clear channel T3, Channelized T3 -gt, T1, n x T1, full-rate T1, Channelized T1, fractional T1, or DS-0 connections. When configured as clear channel T3 ports, connections to DS-3 and subrate DS-3 services can be provisioned. When configured as Channelized T3 ports, up to 112 T1 links or up to 1023 n x DS-0 channels can be supported, making the Cisco Channelized T3 SPA Version 2 a highly flexible interface for WAN provisioning. With integrated data-service-unit (DSU) functions on a per-port basis, the Cisco Channelized T3 SPA Version 2 is compatible with the large number of standards-compliant DSUs on the market. SPA-4XCT3/DS0 Specification SPA-4XCT3/DS0 Specifications Product compatibility middot, Cisco 7600 Series Routers middot, Cisco ASR 1000 Series Aggregation Services Routers middot, Cisco ASR 9000 Series Routers (4-port only) Minimum software version middot, Cisco 7600 Series Routers with Cisco IOS Software Release 15.4(2)S and Cisco IOS XE Software Release 3.12.0.0S middot, Cisco ASR 1000 Series Router with Cisco IOS XE Software Release 3.12.0, 3.11.2, or 3.10.3 middot, Cisco ASR 9000 Series Router with Cisco IOS XR Software Release 5.2.0 Port density per SPA 4-port Physical interface middot, 1.0 and 2.3 RF connectors (75-ohm impedance) middot, 1.0 and 2.3 RF-to-BNC adapter cable option Protocols Serial encapsulations: middot, High-Level Data Link Control (HDLC) middot, Point-to-Point Protocol (PPP), RFC 1662 middot, Frame Relay, RFC 1490 Multilink support (bundle limit dependent on number of links per bundle, maximum 12 T1 links per bundle) MLPPP, RFC 1990 MLFR, FRF.16 LFI over Frame Relay (FRF.12) and MLPPP Features and functions Up to 4 T3 ports middot, Up to 112 T1 ports (28 T1 multiplexed onto a single T3) middot, Up to 1024 n x DS-0 channels (where n is 1 to 24) with no T3 configured middot, Up to 400 n x DS-0 channels (where n is 1 to 24) with one or more T3 configured middot, Support for full-rate (clear channel) T3, Channelized T3 to T1, full-rate T1, Channelized T1, and fractional T1 middot, Integrated DSUs middot, Internal or line-derived (loop) clocking selectable on each T3 or T1 middot, Loopback capabilities: в—¦ Local and remote loopback at the T3 and T1 levels в—¦ Response to embedded loopback commands в—¦ Insertion of loopback commands into transmitted signal middot, Bit-error-rate-testing (BERT) pattern generation and detection per channel в—¦ Programmable pseudorandom pattern up to 32 bits long middot, T3: All 0s, all 1s, 215, 220, 220 Quasi-Random Signal Sequence (QRSS), 223, alternating 0s and 1s, 1-in-8, and 3-in-24 middot, T1: All 0s, all 1s, 211, 215, 220, 220 QRSS, 223, alternating 0s and 1s, 1-in-8, and 3-in-24 в—¦ 32-bit error-count and bit-count registers в—¦ Fully independent transmit and receive sections в—¦ Detection of test patterns with bit error rates up to 10-2 middot, 24-hour history maintained for error statistics and failure counts, at 15-minute intervals middot, 16- and 32-bit cyclic redundancy check (CRC), 16-bit default T1-specific features middot, Full-duplex connectivity at T1 rate (1.536 MHz) middot, D4 Super Frame (SF) or Extended Super Frame (ESF) framing middot, ANSI T1.403 and ATT TR 54016 Facility Data Link (FDL) support middot, Alarm monitoring: в—¦ Alarm indication signal (AIS) в—¦ Out of frame (OOF) в—¦ Far-end alarm failure (yellow or distant alarm) middot, Performance data collection: в—¦ CRC and bit errors в—¦ Framing bit errors (FERR) в—¦ Line errored seconds в—¦ Far-end errored seconds в—¦ Far-end severely errored seconds в—¦ Far-end unavailable seconds T3-specific features middot, Full-duplex connectivity at T3 rate (44.736 MHz) middot, C-Bit or M23 framing middot, Subrate and scrambling support of Quick Eagle Networks (formerly Digital Link), Larscom, ADC Kentrox, Adtran, and Verilink DSUs middot, Binary 3-zero substitution (B3ZS) line coding middot, Maintenance data link (MDL) middot, T3 far-end alarm and control (FEAC) channel support middot, Line build-out up to 450 ft (135m) middot, Alarm monitoring: в—¦ AIS в—¦ OOF в—¦ Loss of signal (LOS) в—¦ Far-end receive failure (FERF) middot, Performance data collection: в—¦ Line coding violation (LCV) в—¦ Framing bit errors (FERR) (F- or M-bit errors) в—¦ P-bit error counts (path-parity errors) в—¦ C-bit error counts в—¦ Far-end block error (FEBE) counts Reliability and availability middot, OIR middot, Single SPA software reset MIBs middot, RFC 2495 MIB (DS-1/E1 MIB) middot, RFC 2496 MIB (DS-3 MIB) Network management Simple Network Management Protocol (SNMP) Physical specifications middot, Weight: 0.75 lb (0.34 kg) middot, Height: 0.8 in. (2.03 cm) (single height) middot, Width: 6.75 in. (17.15 cm) middot, Depth: 7.28 in. (18.49 cm) Power middot, 2-port: 11.3W maximum middot, 4-port: 13.2W maximum Environmental specifications middot, Operating temperature: 41 to 104F (5 to 40C) middot, Storage temperature: 38 to 150F (40 to 70C) middot, Operating humidity: 5 to 85% relative humidity middot, Storage humidity: 5 to 95% relative humidity Compliance and agency approvals CE Marking Safety middot, UL 60950 middot, CSA 22.2 No.60950 middot, IEC 60950 middot, EN 60950 middot, AS/NZS 3260 middot, TS001 EMC middot, CFR47 Part 15 middot, ICES 003 middot, EN55022 middot, CISPR 22 middot, AS/NZ 3548 middot, VCCI middot, EN55024 middot, EN50082-1 middot, EN61000-6-1 Telecom (T3) middot, ANSI T1 107 middot, T1 404 middot, ATT 54014 middot, ANSI T1.231 Telecom (T1) middot, ANSI T1.403 middot, ATT 54016 FAQ 1. Where do your products come from? All of our products are from Cisco/Huawei distribution , Cisco/Huawei partner directly. We are Cisco partner at local, with cisco verified certification. 2. If all equioments I can buy service from local cisco ? For all equipments you can buy service from local, because our goods are smart net free, all with clean serial number. 3. How to ship the goods? Lonrise work with DHL,FEDEX,UPS and TNT. Your order will be dispatched by express delivery door to door. 4. Whats your payment term? We always accept 10% advance payment. For long term cooperation, we can consider to apply credit accordingly. Related products SPA-1XCHOC12/DS0 SPA-2X1GE-V2 SPA-8XCHT1/E1-V2 SPA-1XOC48POS/RPR SPA-4X1FE-TX-V2 SPA-10X1GE-V2 SPA-5X1GE-V2 SPA-2XOC48POS/RPR SPA-4XCT3DS0 Sales: Yolanda Mob/Whatsapp: +8618258465246 Email: yolanda@lonriseequipment.com Skype: Yolanda-Lonrise
