Cisco Router Modular A9K-MPA-2X40GE 2 port 40 Gigabit ASR 9000 Port Adapter A9K-MPA-4X10GE Overview A9K-MPA-4X10GE is Cisco ASR 9000 Series Router 4-port 10GE Modular Port Adapter. Cisco ASR 9000 Series modular line cards provide customers with a flexible solution supporting multiple combinations of Ethernet ports, all in a single slot of the Cisco ASR 9000 Series Aggregation Services Routers. Modular line cards support a wide range of interfaces and densities A9K-MPA-4X10GE Specification Features and Benefits of Cisco ASR 9000 Series Modular Line Cards Feature Benefit Interface Support Pluggable 1-Gigabit Small Form-Factor Pluggable (SFP), 10-Gigabit SFP (XFP), and 40-Gigabit Quad SFP (QSFP) interfaces Provide the capability to mix and match interface types across a single line card, for a complete list of supported interfaces, please see Cisco ASR 9000 Transceiver Modules: Line Card Support data sheet G.709 and Advanced FEC Standard G.709 providing transmission-layer operations, administration, and maintenance (OAM), G.709 Standard FEC and Advanced FEC for enhanced transmission system performance Scalable and Integrated Multiservice Support Layer 2 and Layer 3 services Combined IP, MPLS, Ethernet, Layer 2 VPN (L2VPN), and Layer 3 VPN (L3VPN) services Evolutionary Monitoring Carrier-class OAM NetFlow, IEEE 802.1ag, IEEE 802.3ah, ITU Y.1731, IP service-level agreement (IP SLA), virtual circuit connectivity verification (VCCV), ping, and traceroute Video monitoring (VidMon) VidMon, providing real-time monitoring of video flows, including issuance of alarm upon degradation Carrier-Grade OS Cisco IOS XR Software Modular, patchable, restartable, scalable, highly available, carrier-core and edge-proven operating system T-Class Synchronization Synchronous Ethernet Derives and provides synchronization from and to Ethernet interfaces, Cisco ASR 9000 Series RSPs, and network synchronization interfaces IEEE 1588-2008 Cisco ASR 9000 Series support of the IEEE 1588-2008 protocol provides the capability to distribute precision time Product Specifications: Description Specification Chassis compatibility Compatible with the Cisco ASR 9922, 9010, 9006 and 9001 systems Port density Up to 2 modular port adapters are supported per line card.. Ethernet в—Џ IEEE 802.3 compliant в—Џ 10 Gigabit Ethernet PHY monitoring в—Џ IEEE 802.x flow control в—Џ Full-duplex operation в—Џ Per-port byte and packet counters for policy drops, oversubscription drops, cyclic redundancy check (CRC) error drops, packet sizes, and unicast, multicast, and broadcast packets Card density Maximum number of line cards per system: Cisco ASR 9922 = 20, Cisco ASR 9010 = 8, and Cisco ASR 9006 = 4 Options Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport Optimized (basic QoS) line card. Reliability and availability Line card online insertion and removal (OIR) support without system impact Network Equipment Building Standards (NEBS) Cisco ASR 9000 Series Routers are designed to meet: в—Џ SR-3580: NEBS Criteria Levels (Level 3) в—Џ GR-1089-CORE: NEBS EMC and Safety в—Џ GR-63-CORE: NEBS Physical Protection Operating temperature (nominal) 41 to 104F (5 to 40C) Operating temperature (short-term)[1] 23 to 131F (5 to 55C) Operating humidity (nominal) relative humidity 10 to 85% Storage temperature 40 to 158F (40 to 70C) Storage relative humidity 5 to 95% Note: Not to exceed 0.024 kg of water per kg of dry air Operating altitude 60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements) ETSI standards Cisco ASR 9000 Series Routers are designed to meet: в—Џ EN300 386: Telecommunications Network Equipment (EMC) в—Џ ETSI 300 019 Storage Class 1.1 в—Џ ETSI 300 019 Transportation Class 2.3 в—Џ ETSI 300 019 Stationary Use Class 3.1 в—Џ EN55022: Information Technology Equipment (Emissions) в—Џ EN55024: Information Technology Equipment (Immunity) в—Џ EN50082-1/EN-61000-6-1: Generic Immunity Standard EMC standards Cisco ASR 9000 Series Routers are designed to meet: в—Џ FCC Class A в—Џ ICES 003 Class A в—Џ AS/NZS 3548 Class A в—Џ CISPR 22 (EN55022) Class A в—Џ VCCI Class A в—Џ BSMI Class A в—Џ IEC/EN 61000-3-2: Power Line Harmonics в—Џ IEC/EN 61000-3-3: Voltage Fluctuations and Flicker Immunity Cisco ASR 9000 Series Routers are designed to meet: в—Џ IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) в—Џ IEC/EN-61000-4-3: Radiated Immunity (10V/m) в—Џ IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) в—Џ IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) в—Џ IEC/EN-61000-4-5: Signal Ports (1kV) в—Џ IEC/EN-61000-4-5: Surge DC Port (1kV) в—Џ IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) в—Џ IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) в—Џ IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations Safety Cisco ASR 9000 Series Routers are designed to meet: в—Џ UL/CSA/IEC/EN 60950-1 в—Џ IEC/EN 60825 Laser Safety в—Џ ACA TS001 в—Џ AS/NZS 60950 в—Џ FDA: Code of Federal Regulations Laser Safety
