Cisco Multiflex Voice/WAN Card VWIC3-1MFT-T1/E1 With 1 X T1 / E1 Network Wan VWIC3-1MFT-T1/E Overview The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E integrated services routers. The T1/E1 MFT VWIC3 cards support both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications. All MFT VWIC3 modules include the drop-and-insert multiplexing capability, which eliminates costly external third-party channel service units/data service units (CSUs/DSUs) and drop-and-insert multiplexers. Product Description The Cisco MFT VWIC3 combines WAN-interface-card (WIC) and voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface because the Cisco MFT VWIC3 cards can be reused in packet voice applications. Introduction The Cisco Third-generation 1-, 2-port and 4-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC3s) support data and voice applications on the Cisco 1921, 1941 and 1941W (data only), and the Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E Integrated Services Routers. The Cisco MFT VWIC3 combines WAN-interface-card (WIC) and voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface because the Cisco MFT VWIC3 cards can be reused in packet voice applications. The Cisco MFT VWIC3 interface cards add improvements over the Cisco Second-generation 1- and 2-port T1/E1 Multiflex Voice/WAN Interface Cards (MFT VWIC2s). The Cisco 2- and 4-port MFT VWIC3s enable each port to be clocked from an independent clock source for data applications. Voice applications can now be clocked independently from data applications, with all ports for voice applications clocked from a single source. The Cisco MFT VWIC3s use the ECAN on the motherboard PVDM cards with up to 128ms echo-tail length for demanding network conditions. MFT VWIC3 cards support up to 2 channel groups per T1/E1 port for serial data applications. Refer to Table 3 for all configuration options offered with the MFT VWIC3 cards. The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E integrated services routers. The T1/E1 MFT VWIC3 cards support both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications. All MFT VWIC3 modules include the drop-and-insert multiplexing capability, which eliminates costly external third-party channel service units/data service units (CSUs/DSUs) and drop-and-insert multiplexers. VWIC3-1MFT-T1/E1 Specification VWIC3-1MFT-T1/E1 Manufacturer Cisco Part Number VWIC3-1MFT-T1/E1 Device Type Interface module Form factor 1-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card Specifications Number of Ports 1 T1 Support Yes E1 Support Yes Unstructured E1 (G.703) Support No Data Support WIC Mode Yes Voice Support VIC* Yes Drop-and-Insert Multiplexing Yes Configuration Comparison Serial Data (channel-group*) 2 total 2 per port Voice CAS (ds0-group**) 24 total (T1) 31 total (E1) 1 per timeslot PRI (pri-group***) 1 total 1 per port Drop Insert (tdm-group****) 24 total (T1) 31 total (E1) 1 per timeslot Network Management Features Telnet or Console Remote and local configuration, monitoring, and troubleshooting from Cisco IOS Software CLI Simple Network Management Protocol (SNMP) Router and DSU/CSU managed by single SNMP agent, router, DSU, and CSU appear as a single network entity to user Standard MIB (MIB II) Cisco Integrated DSU/CSU MIB RFC 1406 T1 MIB, Including Alarm Detection and Reporting SNMP Traps Generated in response to alarms Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release Requirements VWIC3-1MFT-T1/E1 VWIC3-2MFT-T1/E1 VWIC3-1MFT-G703 VWIC3-2MFT-G703 VWIC3-4MFT-T1/E1 Cisco 1900 Chassis EHWIC Slots 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T N/A* Cisco 2900 Chassis EHWIC Slots 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.1(3)T* Cisco 3900 Chassis EHWIC Slots 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.0(1)M3, 15.1(1)T1, 15.1(2)T 15.1(3)T Cisco MFT VWIC3 Card Feature Comparison Part Number Number of Ports T1 Support E1 Support Unstructured E1 (G.703) Support Data Support WIC Mode Voice Support VIC* Drop-and-Insert Multiplexing VWIC3-1MFT-T1/E1 1 Yes Yes No Yes Yes Yes VWIC3-2MFT-T1/E1 2 Yes Yes No Yes Yes Yes VWIC3-4MFT-T1/E1 4 Yes Yes No Yes Yes Yes VWIC3-1MFT-G703 1 Yes Yes Yes Yes Yes Yes VWIC3-2MFT-G703 2 Yes Yes Yes Yes Yes Yes Company Profile Warehouse Represented Brands FAQ Other related models: GLC-LH-SM GLC-LH-SMD GLC-SX-MM GLC-SX-MMD GLC-ZX-SM SFP-10G-ER SFP-10G-LR SFP-10G-SR SFP-10G-ZR GLC-TE= GLC-BX40-U-I= GLC-T= GLC-SX-MMD= GLC-LH-SMD= GLC-BX-U= Please feel free to contact me for more details. Sales: Yolanda Mob/Whatsapp:+8618258465246 Email: yolanda@lonriseequipment.com Skype: Yolanda-Lonrise
