Compare to Similar Items Table 3 shows the comparison between C9300-24T-E and C9300-24P-A. Product Code C9300-24T-E C9300-24P-A Product Description Catalyst 9300 24-port data only, Network Essentials Catalyst 9300 24-port PoE+, Network Advantage Total 10/100/1000 or Multigigabit copper ports 24 24 POE+ Default AC power supply 350W AC 715W AC Available PoE power -- 445W Dimensions (H x W x D) 1.73 x 17.5 x 17.5 Inches 1.73 x 17.5 x 17.5 Inches Weight 16.33 Pounds 16.33 Pounds Get More Information Do you have any question about the Cisco C9300-24T-E? Contact us now via Live Chat or sales@router-switch.com. C9300-24T-E Specification C9300-24T-E Specification Part Number C9300-24T-E Product Description Catalyst 9300 24-port data only, Network Essentials Total 10/100/1000 or Multigigabit copper ports 24 Default AC power supply 350W AC Available PoE power -- Cisco StackWise-480 Yes Cisco StackPower Yes Default power supply PWR-C1-350WAC-P/2 Switching capacity 208 Gbps on 24-port Gigabit Ethernet model Stacking bandwidth 480 Gbps Total number of MAC addresses 32,000 Total number of IPv4 routes (ARP plus learned routes) 32,000 (24,000 direct routes and 8000 indirect routes) IPv4 routing entries 32,000 IPv6 routing entries 16,000 Multicast routing scale 8000 QoS scale entries 5120 ACL scale entries 5120 Packet buffer per SKU 16 MB buffer for 24- or 48-port Gigabit Ethernet models FNF entries 64,000 flow on 24- and 48-port Gigabit Ethernet models DRAM 8 GB Flash 16 GB VLAN IDs 4000 Total Switched Virtual Interfaces (SVIs) 2000 Jumbo frames 9198 bytes Total routed ports per 9300 Series stack 208 Wireless bandwidth per switch Up to 48 Gbps on 24-port Gigabit Ethernet model Forwarding rate 154.76 Mpps Dimensions (H x W x D) 1.73 x 17.5 x 17.5 Inches Weight 16.33 Pounds Mean time between failures (hours) 299,000 Safety certifications в—Џ UL 60950-1 в—Џ CAN/CSA-C222.2 No. 60950-1 в—Џ EN 60950-1 в—Џ IEC 60950-1 в—Џ AS/NZS 60950.1 в—Џ IEEE 802.3 Electromagnetic emissions certifications в—Џ 47 CFR Part 15 в—Џ CISPR22 Class A в—Џ EN 300 386 V1.6.1 в—Џ EN 55022 Class A в—Џ EN 55032 Class A в—Џ CISPR 32 Class A в—Џ EN61000-3-2 в—Џ EN61000-3-3 в—Џ ICES-003 Class A в—Џ TCVN 7189 Class A в—Џ V-3 Class A в—Џ CISPR24 в—Џ EN 300 386 в—Џ EN55024 в—Џ TCVN 7317 Environmental PWR-C45-9000ACV Overview PWR-C45-9000ACV is a Cisco Catalyst Switch 4500 Series Switch Power Supply, delivering 9000W AC power (Data and PoE) for Cisco 4500 switches. Notice that PWR-C45-9000ACV= is similar with PWR-C45-9000ACV, except that PWR-C45-9000ACV= is a spare one. PWR-C45-9000ACV Specification PWR-C45-9000ACV Specification AC-input type Autoranging inputs with power factor correction (PFC) Note PFC is a standard feature on all Catalyst 4500 E-series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components. AC-input voltage Low-line (120 VAC nominal)85 VAC (min) to 132 VAC (max) High-line (230 VAC nominal)170 VAC (min) to 264 VAC (max) Note Mixed voltage input mode operation is supported. However, with mixed voltage inputs, output power defaults to the triple 120 VAC output limits. AC-input current 12 A (max) @ 120 VAC (for each input) 16 A (max) @ 230 VAC (for each input) AC-input frequency 50/60 Hz (nominal) (plusmn,3% for full range) DC output voltages 12 VDC (11.8 VDC (min) to 12.2 VDC (max)) 3.3 VDC (3.2 VDC (min) to 3.4 VDC (max)) -50 VDC (-48 VDC (min) to -52 VDC (max)) Power supply output Total output power depends on the number of inputs connected and the available source AC voltage. If more than one input is used, all inputs be the same AC voltage (either high-line or low-line). Note Mixed voltage input mode operation is supported. 1100 W operation (with one 120 VAC nominal input) 80 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 20 A @ 50 VDC (PoE if used) 2200 W operation (with two 120 VAC nominal inputs) 121.7 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 40 A @ 50 VDC (PoE if used) 3300 W operation (with three 120 VAC nominal inputs) 121.7 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 50 A @ 50 VDC (PoE if used) 3000 W operation (with one 230 VAC nominal input) 121.7 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 50 A @ 50 VDC (PoE if used) 6000 W operation (with two 230 VAC nominal inputs) 166.7 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 100 A @ 50 VDC (PoE if used) 9000 W operation (with three 230 VAC nominal inputs) 166.7 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 150 A @ 50 VDC (PoE if used) Power supply output capacity 9000 W maximum Output holdup time 20 ms minimum kVA rating6 9680 kVA (power factor = 0.99) Heat dissipation 3010 BTUs/hr (max.) Minimum software requirement Cisco IOS Release IOS-XE 3.4.0SG/15.1(2)SG Power over Ethernet Supported, up to 7500 W LEDs and their meanings INPUT 1 OK INPUT 2 OK INPUT 3 OK GreenSource AC voltage is OK. (Input voltage is 85 VAC or greater.) OffSource AC voltage falls below 70 VAC, source AC is not present, or the power supply is turned off. Note For an AC input voltage that is between 70 VAC and 85 VAC, the INPUT OK LED condition is indeterminate, it can be either green, off, or flashing green. FAN OK GreenPower supply fan is operating properly. OffPower supply fan failure is detected. OUTPUT FAIL RedProblem with one or more of the DC-output voltages of the power supply is detected. OffDC-output voltage with acceptable margins. Note For proper operation of the OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray assembly and one supervisor engine. Systems with dual power supplies must have a minimum configuration of one fan tray assembly, one supervisor engine, and one additional module. Failure to meet these minimum configuration requirements can cause a false power supply output fail signal. Our stock support good price C1000-48P-4G-L C9500-NM-8X CAB-SPWR-30CM C1000-48T-4G-L C9800-F-X-K9 C9200L-STACK-KIT WS-C2960X-24TS-LL N9K-C93180YC-FX PWR-C4-950WAC-R WS-C2960X-24PSQ-L N3K-C3172PQ-XL C9200-NM-4G WS-C2960X-24PS-L N2K-C2348UPQ C9200-NM-4X WS-C2960X-48TS-L AIR-AP1832I-H-K9 C9300-NM-4G WS-C2960L-24PS-AP AIR-AP2802I-H-K9 C9300-NM-8X WS-C2960L-16TS-LL C9115AXI-H GLC-LH-SMD WS-C2960L-8TS-LL C9120AXI-H SFP-10G-SR WS-C3560-48FS-S AIR-AP1562I-H-K9 SFP-10G-LR WS-C2960X-24PS-L AIR-AP1562D-H-K9 SFP-10G-SR-S C9200L-48P-4X-E C9800-L-C-K9 SFP-10G-LR-S C9200L-48P-4G-E C9800-L-F-K9 GLC-TE C9200L-24T-4G-E AP505 SFP-H10GB-CU2M C9300-24T-A AP515 MA-CBL-40G-3M C9300-48T-A CP-3905 GLC-LH-SMD= C9300-24S-A CP-7821-K9 ISR4331/K9 C9300-48S-A CP-8832-MIC-WIRED ISR4331/K9 RF C9300-48P-E CS-MIC-TABLE-J FPR2110-ASA-K9 C9300-24P-E AIR-AP3802I-E-K9 FPR2110-ASA-K9 C9300L-24T-4G-E C1111-8P FPR2120-ASA-K9 C9300L-48T-4G-E PWR-C5-125WAC FPR2130-ASA-K9 C9300-NM-8X PWR-C5-1KWAC C9200-NM-4G= C9400-LC-24S PWR-C6-125WAC C9200-NM-4G= C9400-LC-48S STACK-T1-50CM C9200L-24P-4G-CE C9500-24Y4C-A STACK-T1-1M C9200L-24P-4G-CE C9500-48Y4C-A STACK-T1-3M C9200L-48P-4G-E
