Positioning The OptiX OSN 1500 intelligent optical transmission system (the OptiX OSN 1500 for short) developed by Huawei is the next-generation intelligent optical transmission equipment. The OptiX OSN 1500 is of a 'universal switch' architecture. That is, the OptiX OSN 1500 can be used in packet mode or in TDM mode. When used with the other equipment of Huawei, the OptiX OSN 1500 supports various networking applications, such as the pure packet mode application, hybrid networking application (overlay networking of the packet mode and TDM mode), and pure TDM mode application. By using a proper networking solution, the data service and conventional SDH service can be processed in the optimal manner. Technology The OptiX OSN 1500 efficiently transmits voice, data, SAN/Video, and video services on the same platform. In packet mode, the OptiX OSN 1500 supports the following technologies: Multiprotocol Label Switching (MPLS) ETH PWE3 (Pseudo Wire Edge to Edge Emulation) TDM PWE3 In TDM mode, the OptiX OSN 1500 supports the following technologies: Synchronous digital hierarchy (SDH) Plesiochronous digital hierarchy (PDH) Ethernet Asynchronous transfer mode (ATM) Storage area network (SAN)/Video Wavelength division multiplexing (WDM) Digital data network (DDN) Network Application OptiX OSN 1500 is mainly used at the access layer of the metropolitan area network (MAN). The network application scenarios are described as follows: In TDM networking, can be networked with the other OptiX transmission equipment (the OptiX OSN 9560, OptiX OSN 9500, OptiX OSN 7500 II, OptiX OSN 7500, OptiX OSN 3500 II, OptiX OSN 2500, OptiX OSN 3500, OptiX OSN 500, and OptiX OSN 550) to optimize carrier investment, achieving a full range of networking solutions at the access layer, convergence layer, and backbone layer. With the packet switching technology, can constitute a packet data transmission network with the other OptiX transmission equipment (the OptiX OSN 7500, OptiX OSN 7500 II, OptiX OSN 3500, OptiX OSN 500, OptiX OSN 550, and OptiX RTN 900) to meet the requirement for bearing IP services. Can be flexibly networked with WDM equipment and Metro equipment. Can transparently transmit services over third-party Layer 2 networks, allowing end-to-end configuration and management.
