Product Description Functions and Features Table 2 Functions and features of the ES1D2G48SFA0 Function and Feature Description Basic function Provides forty-eight GE optical ports for data transmission and line-rate switching. Distributed forwarding Performs concurrent data forwarding using a distributed data plane. Buffer 2 MB MAC Address Table Size 32K Hot swap The ES1D2G48SFA0 is hot swappable. Indicators and Ports Figure 2 Indicators on the ES1D2G48SFA0 panel Table 3 Indicators on the ES1D2G48SFA0 panel Number Indicator Color Description 1 ACT indicator of a lower optical port Yellow Blinking: The port is transmitting and receiving data. 2 ACT indicator of an upper optical port 3 LINK indicator of a lower optical port Green Steady on: A link has been established on the port. 4 LINK indicator of an upper optical port 5 RUN/ALM: running status indicator Green Steady on: The card has been powered on, but the software is not running. Slow blinking: The card software is running properly. Fast blinking: The card software is starting. Red Steady on: The card has failed, and the fault requires manual intervention. Yellow Steady on: The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) Figure 3 Ports on the ES1D2G48SFA0 panel 1 Forty-eight 100/1000BASE-X optical ports 100/1000BASE-X optical ports Table 4 lists the attributes of a 100/1000BASE-X optical port with an optical module installed. Table 4 Optical port attributes (optical module) Attribute Description Connector type SFP Optical port attributes Depend on the SFP optical module used. For details about optical modules supported by the ES1D2G48SFA0 and its attributes, see FE SFP/eSFP Optical Modules, GE eSFP Optical Modules, GE-CWDM eSFP Optical Modules, and GE-DWDM eSFP Optical Modules. Standards compliance IEEE 802.3z Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol IP Table 5 lists the attributes of a 100/1000BASE-X optical port with a copper module installed. Table 5 Optical port attributes (copper module) Attribute Description Connector type SFP Optical port attributes Depend on the SFP copper module used. For details on the copper modules supported by the cards and attributes of the copper modules, see GE SFP Copper Modules (10 Mbit/s, 100 Mbit/s and 1000 Mbit/s rates). Standards compliance IEEE 802.3ab Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol IP Specifications Table 6 Specifications of the ES1D2G48SFA0 Item Description Physical specifications Dimensions (W x D x H): 394.7 mm x 426.8 mm x 35.1 mm (15.5 in. x 16.8 in. x 1.4 in.) Weight: 2.60 kg (5.73 lb) Maximum power consumption: 65 W Environment parameters Operating temperature: 0C to 45C (32F to 113F) Operating relative humidity: 5% RH to 95% RH (noncondensing) Storage temperature: -40C to +70C (-40F to +158F) Storage relative humidity: 5% RH to 95% RH (noncondensing) Ordering Information Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain latest ordering information, contact Huawei switch distributors or Huawei local office. Table 7 Ordering information Part Number Card Description Card Model 03030PGM 48-port 100/1000BASE-X interface card (FA, SFP) ES1D2G48SFA0
