Cisco 10GBASE-LR SFP+ SFP-10G-LR 1310nm 10km DOM Transceiver Module SFP-10G-LR Overview The Cisco S-Class 10GBASE SFP+ modules (Figure 1) offer customers a variety of 10 Gigabit Ethernet connectivity options optimized for Enterprise and data center applications. S-Class optics are available for the most common reaches needed for these applications. Main features of Cisco 10GBASE SFP+ modules include: в—Џ Smallest 10G form factor в—Џ Commercial temperature (0 to 70C) only в—Џ Supports 10GBASE Ethernet only в—Џ Hot-swappable input/output device that plugs in to an Ethernet SFP+ port of Cisco platforms в—Џ Provides flexibility of interface choice в—Џ Supports digital optical monitoring capability в—Џ Cisco quality identification (ID) feature that enables a Cisco platform to identify - optics supported by Cisco technology в—Џ Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link SFP-10G-LR Specification Media Type: Single-Mode Fiber (SMF) TX Wavelength: 1310 nm. RX Wavelenght: 1310 nm. Minimum Optical Budget: 9 dB Maximum Distance: 10km/20km Supported Data Rate: 1.25-10.31 Gbps Supported Applications: 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps) DDM/DOM: Support Temperature Range: Standard 0-70C Connectors: Double LC Tx Wavelength Bandwidth: 100 nm (1260-1360 nm) Rx Wavelength Bandwidth: 100 nm (1260-1360 nm) Minimum Transmitting Power: -5 dB Maximum Transmitting Power: 1 dB Receiver Sensitivity: -14 dBm Receiver Overload: 0.5 dBm Dispersion: 140-160 ps/nm Transmitter Type: DFB Laser Receiver Type: PIN photodiode Power: +3.3V single power supply Chipset: MAXIM, MINDSPEED, SEMTECH Compliance: CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA 10G-SFP-20 is Multi-Vendor MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable It has minimum guaranteed optical budget of 9 dB, with in most cases is enough to reach about 20 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1310 nm. and 1310 nm. PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 10G-SFP-20 operates in Standard 0-70C temperature range and has Double LC interface. Quality and standards are the foundation of LONRISE. We are dedicated to providing customers with outstanding, standards-compliant products and services. LONRISE has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service. Other Product Cisco 10GBASE SFP+ Modules Cisco SFP-10G-SR Cisco SFP-10G-LRM Cisco SFP-10G-BXD-I Cisco SFP-H10GB-CU1M Cisco SFP-H10GB-CU2-5M Business
