Huawei S7712 S7700 Series Switches original new stock for networking manufacturer Appearance and Structure The S7712 chassis is 15 U high (1 U = 44.45 mm). When the chassis has no cable management frame installed, the dimensions (H x W x D) are 663.9 mm x 442 mm x 517.4 mm. When the chassis has cable management frames installed, the dimensions (H x W x D) are 663.9 mm x 442 mm x 585 mm. S7712 chassis (front view) S7712 chassis (rear view) shows the front view of S7712 chassis structure. S7712 chassis structure (front view) 1. Twelve of the following service cards can be installed: Value-Added Service Unit Open Service Platform Unit 100M Interface Card 1000M Interface Card GE/10GE Interface Card 10GE Interface Card 40GE Interface Card 40GE/100GE Interface Card 100GE Interface Card NOTE: The cards supported by a switch depend on the software version. For details, see Hardware Query Tool. 2. Two MPUs 3. A pair of mounting brackets NOTE: The mounting brackets are used to secure the chassis in the cabinet. 4. Four power modules 5. Two EH1D200CMU00-Centralized Monitoring Unit 6. Four PoE power modules 2200 W AC Power Module 800 W AC Power Module 2200 W DC Power Module (Supported in V200R006C00 and later versions) 3000 W AC Power Module (Supported in V200R012C00 and later versions) NOTE: For details, see Power Module. 7. Ground screw NOTE: The ground screw is used to ground the chassis. 8. Front ESD jack NOTE: The ground terminal of an ESD wrist strap can be inserted into this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. 9. Cable management frames NOTE: Cable management frames are used to route cables. shows the rear view of S7712 chassis structure. S7712 chassis structure (rear view) 1. Four Fan Module 2. Rear ESD jack NOTE: The ground terminal of an ESD wrist strap can be inserted into this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. 3. Air filter NOTE: The air filter prevents dust from entering the chassis. 4. A pair of removable handles NOTE: You can install these handles on two sides of the chassis to lift the chassis. - - Mapping between the S7712 chassis and software versions Chassis Version S7712 chassis V100R003C01 and later versions S7712 PoE chassis V100R003C01 and later versions S7712 chassis, FCC certified V200R003C00 and later versions S7712 PoE chassis, FCC certified V200R003C00 and later versions S7712 chassis specifications Item Description LPU slots 12 MPU slots 2 Fan slots 4 System power supply slots 4 PoE power supply slots 4 Maximum port density V100R006C00: 576xFE, 576xGE, 144x10GE V200R001C00: 576xFE, 576xGE, 480x10GE V200R002C00 to V200R007C00: 576xFE, 576xGE, 480x10GE, 24x40GE V200R008C00 to V200R009C00: 576xFE, 576xGE, 480x10GE, 24x40GE, 24x100GE V200R010C00 to V200R019C00: 576xFE, 576xGE, 576x10GE, 24x40GE, 48x100GE V200R019C00 and later versions: 576xFE, 576xGE, 576x10GE, 24x40GE, 72x100GE Installation In an N66E or N68E cabinet, one cabinet for one chassis CSS CSS card or service port clustering PoE Power input: Versions earlier than V200R006C00 support only AC power supply. V200R006C00 and later versions support both AC power supply and DC power supply (only 2200 W DC power modules). V200R012C00 and later versions support 3000 W AC power supply PoE power module backup: no backup, 3+1 backup, or 2+2 backup Maximum output power: 9000 W Maximum power consumption (fully configured, no PoE power supply) NOTE: The heat dissipation value of a chassis equals the current power consumption of the chassis. 4200 W Power specifications DC input voltage Rated voltage: -48 V DC/-60 V DC Maximum voltage range: 1600 W DC power module: -38.4 V DC to -72 V DC 2200 W DC power module: -40 V DC to -72 V DC AC input voltage Rated voltage: 110 V AC/220 V AC, 50/60 Hz Maximum voltage range: 90 V AC to 290 V AC, 47 Hz to 63 Hz (The output power reduces to half of the maximum output when the input voltage is in the range of 90 V AC to 175 V AC.) HVDC input voltage (3000 W AC) Rated voltage: 240 V DC Maximum voltage range: 190 V DC to 290 V DC Dimensions (H x W x D, without rack-mounting brackets) With cable management frames (15 U high): 663.9 mm x 442 mm x 585 mm (26.1 in. x 17.4 in. x 23.0 in.) Without cable management frames (15 U high): 663.9 mm x 442 mm x 517.4 mm (26.1 in. x 17.4 in. x 20.37 in.) Weight (empty/fully configured) 25 kg/97 kg (55.1 lb/213.8 lb) Reliability and availability MTBF: 24.1 years MTTR: 2 hours Availability: 0.9999959 NOTE: The preceding values are calculated based on the typical configuration of the product. The actual values will vary depending on the modules installed on the product. Environment specifications Operating temperature and altitude: -60 m to +1800 m (-197 ft. to 5906 ft.): 0C to 45C (32F to 113F) 1800 m to 4000 m (5906 ft. to 13123 ft.): Operating temperature decreases by 1C (1.8F) every time the altitude increases 220 m (722 ft.). 4000 m (13123 ft.): 0C to 35C (32F to 95F) Relative humidity: 5% RH to 95% RH (noncondensing) Storage temperature: -40C to +70C (-40F to +158F) Storage altitude: lt, 5000 m (16404 ft.) Noise at normal temperature (acoustic power) le, 72 dB(A) Certification EMC certification Safety certification Manufacturing certification Part number S7712 chassis: 02113306 S7712 chassis, PoE supported: 02113308 S7712 chassis, FCC certified: 02113961 S7712 chassis, PoE supported, FCC certified: 02113963
